Difference between revisions of "Project:Nanode Case"
Jump to navigation
Jump to search
m |
m (moved Nanode Case to Project:Nanode Case) |
(No difference)
| |
Revision as of 21:08, 29 June 2011
Nanode Case
2mm acrylic case cut on the LHS laser cutter. Designed to be small, light and able to have a removable lid.
Equipment:
- Superglue (to bond sides to base)
- 5 x 12mm M3 screws (3 to attach nanode to base plate, 2 for lid)
- 8 x M3 nut (2 for lid, 6 for base)
- A4 sheet of 2mm acrylic
- 4 x 6mm rubber foot pads
(DXF to follow shortly after a couple tweaks)
