Difference between revisions of "Project:Tool Access Control/Solexious Proposal"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
* Use i2c sm030 rfid readers | * Use i2c sm030 rfid readers | ||
* allow different control outputs (relay, Darlington, servo control etc) | * allow different control outputs (relay, Darlington, servo control etc) | ||
| − | * use flash memory for internal storage | + | * <s>use flash memory for internal storage</s> |
==Services== | ==Services== | ||
Revision as of 01:51, 10 February 2012
(ACN refers to Access Control Node, a physical node attached to a tool) Design at: https://github.com/solexious/ACNode
I plan to
- Base the device on the Duemilanove arduino as it fits our needs and has a wide base of users.
- Use the wiznet chip for ethernet support
- Use i2c sm030 rfid readers
- allow different control outputs (relay, Darlington, servo control etc)
use flash memory for internal storage
Services
Mission critical
These must function without networking or main server available:
- Check if card in ACN local db and allow use if is
- Set tool into "out of order" mode
Non critical
- Add cards
- Report back to central server (usage etc)