Difference between revisions of "User:Njh/Wired Weather Station"
< User:Njh
Jump to navigation
Jump to search
m (moved User:Njh/Weather Station to User:Njh/Wired Weather Station) |
|||
Line 1: | Line 1: | ||
− | == Ideas for a Nanode based Weather Station == | + | == Ideas for a Nanode based Wired Weather Station == |
+ | * Based on [[Project:Nanode|Nanode]] Board | ||
+ | * Use [http://www.arduino.cc/playground/Learning/OneWire 1-wire] network where possible | ||
+ | * [http://mqtt.org MQTT] to send to server | ||
+ | * Use IPv6 where possible | ||
− | == | + | == UK Suppliers == |
− | * [http://www.sheepwalkelectronics.co.uk/SWE0.shtml SWE0 - | + | === Temperature === |
− | * [http://www.sheepwalkelectronics.co.uk/SWE1.shtml | + | |
− | * [http://www.sheepwalkelectronics.co.uk/SWE2.shtml | + | * [http://www.sheepwalkelectronics.co.uk/SWE0.shtml SWE0 - 1-wire Temperature Sensor RJ-45 wire] - £5.95 |
− | * [http://www.sheepwalkelectronics.co.uk/SWE3.shtml SWM3 - Humidity | + | * [http://www.sheepwalkelectronics.co.uk/SWE1.shtml SWE1 - 1-wire Temperature Sensor Module] - £7.95 (kit) |
+ | * [http://www.sheepwalkelectronics.co.uk/SWE2.shtml SWE2 - 1-wire Hub Module] - ?? | ||
+ | |||
+ | === Barometric Pressure === | ||
+ | |||
+ | * [http://www.simat.org.uk/barometer.html 1-Wire Barometer Project] - Schematics | ||
+ | |||
+ | === Humidity === | ||
+ | |||
+ | * [http://www.sheepwalkelectronics.co.uk/SWE3.shtml SWM3 - 1-wire Relative Humidity Module] - £27.95 | ||
=== Wind Speed === | === Wind Speed === | ||
Line 18: | Line 31: | ||
* [http://www.geopacks.com/Wired_Rain_Gauge.aspx RainWise from Geopack] - £143.99 | * [http://www.geopacks.com/Wired_Rain_Gauge.aspx RainWise from Geopack] - £143.99 | ||
+ | |||
+ | === Solar Radiation === | ||
− | == US Suppliers | + | == US Suppliers == |
* [http://www.hobby-boards.com/catalog/index.php?cPath=22 HobbyBoards] | * [http://www.hobby-boards.com/catalog/index.php?cPath=22 HobbyBoards] |
Revision as of 22:28, 2 October 2011
Ideas for a Nanode based Wired Weather Station
- Based on Nanode Board
- Use 1-wire network where possible
- MQTT to send to server
- Use IPv6 where possible
UK Suppliers
Temperature
- SWE0 - 1-wire Temperature Sensor RJ-45 wire - £5.95
- SWE1 - 1-wire Temperature Sensor Module - £7.95 (kit)
- SWE2 - 1-wire Hub Module - ??
Barometric Pressure
- 1-Wire Barometer Project - Schematics
Humidity
Wind Speed
- VORTEX Wind Speed Sensor - £49.00
- eVANE Electronic Wind Direction Sensor - £109.00
Rain Gauge
- RainWise from Geopack - £143.99