Difference between revisions of "User talk:Daveb"

From London Hackspace Wiki
Jump to navigation Jump to search
 
(29 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
Dave Brown - hacker in spirit.
+
Dave Brown playing for a while:)
−
 
+
==Project intended to progress sometime in the future==
−
==Project Ideas==
 
 
{|border="1" cellpadding="5" cellspacing="0"  
 
{|border="1" cellpadding="5" cellspacing="0"  
 
|'''Project''' || '''Status''' || '''Notes'''  
 
|'''Project''' || '''Status''' || '''Notes'''  
 
|-
 
|-
−
|'''Reconfigurable sailing proa'''|| plan || Rob Denny at http://www.harryproa.com has some interesting things to say about Proas and how they could be the basis for a cheap, high performance, spacious sailing cruising boat. Perhaps the ideal cruising boat :). I want to explore the sailing characteristics in a model.
+
|'''Reconfigurable sailing proa'''|| mostly inactive, built small bits || Rob Denny at http://www.harryproa.com has some interesting things to say about Proas and how they could be the basis for a cheap, high performance, spacious sailing cruising boat. Perhaps the ideal cruising boat :). I want to explore the sailing characteristics in a model.
 
|-
 
|-
−
|'''LED lights and lenses for my bike''' || plan  || http://pilom.com/BicycleElectronics/DynamoCircuits.htm explains the matching of LEDs to bike generators. I plan to have several strings of LEDs with different beam angles and aiming points - and the appropriate string of LEDs turned on for the curent bike speed.  
+
|'''LED lights and lenses for my bike''' || active || http://pilom.com/BicycleElectronics/DynamoCircuits.htm explains the matching of LEDs to bike generators. I plan to have several strings of LEDs with different beam angles and aiming points - and the appropriate string of LEDs turned on for the current bike speed.  
 
Success criteria:
 
Success criteria:
 
* generate some light at low speed
 
* generate some light at low speed
 
* generate more light at high speed
 
* generate more light at high speed
 
* get it too work
 
* get it too work
−
* dont break the bank  
+
* don't break the bank  
−
 
+
|-
 +
|'''Visible surge arrestor''' || project || I want to know when power surges happen, and if possible stop them cheaply and quickly. [http://wiki.london.hackspace.org.uk/view/Project:SurgeArrestor Project:Surge Arrestor]
 +
|-
 +
|'''Low viscosity blood'''|| thoughts || I have some more reading to do; but am intrigued by http://customers.hbci.com/~wenonah/new/mcdaniel.htm and http://en.wikipedia.org/wiki/Integrated_Pulmonary_Index
 
|-
 
|-
 +
|'''Quiet boxed PCs''' || project || I want to run more than one PC, and the droning gets to me :(  [http://wiki.london.hackspace.org.uk/view/Project:QuietBoxedPCs Project: Quiet Boxed PCs]
 
|}
 
|}
  
−
==Project Status==
+
==Project Ideas==
−
===Bike Headlight===
+
{|border="1" cellpadding="5" cellspacing="0"
−
Have ordered LEDs, reflectors and lenses. Have an attiny85 from the space components. Still need a dynamo, some diodes, mosfets, npns, a circuit and some firmware - oh and maybe a heatsink for the LEDs:). The project is moving along.
+
|'''Project''' || '''Status''' || '''Notes'''
 +
|-
 +
|'''Power efficient raid'''|| idea || Data needs to be written to multiple drives; so a single head-crash does not wipe it out. However, it could be staged to disks sequentially, remaining in memory until it has been written on the 2nd (or n'th) drive. The drives could be spun up more rarely, to simply update the file-store.
 +
Perhaps it can be done using two or more file systems and unionfs; with the data eventually residing on a spinning disk, but initially being saved on ssd. The spinning disk using btrfs to make a sequence of stable snapshots from changes preserved on the ssd.
 +
Maybe btrfs offers this sort of thing directly?
 +
|-
 +
|'''Make solar cell?'''|| idea || Link http://www.freewebs.com/acselectronics/TiO2solar.html
 +
|-
 +
|'''Safe by design nuclear'''|| meme || [http://www.youtube.com/watch?v=P9M__yYbsZ4 2 hour promo]
 +
|-
  
−
Have received the [http://www.ledsupply.com/docs/Luxeon-StarIII.pdf LEDs (white Lambertian] (but not the reflectors etc).
+
|-
−
Have a bottle dynamo, but don't know much about it yet.
+
|'''bike trailer'''|| sketches on envelopes || to carry standard building 2.44 x 1.22 M sheets, 2up kayak, etc. Considering
 +
* extending the bike rack so the trailer can be carried inverted over the rack;
 +
* wheel mounts that can be pivoted to vary the trailers wheelbase
 +
** narrow for storage on bike
 +
** wider for normal use
 +
** extra wide to control the windage of a building sheet
 +
|-
 +
|'''tricycle'''|| just a thought || Means of getting around...
 +
|-
 +
|'''hack caliphers'''|| seen in sparkfun comments || Member #333257
  
−
Still thinking about what the maximum voltage for the LED strings will be ..
+
If you measure current, you will see that the power off state draws 90% of the current of the power on state. For some reason, all electronic calipers seem to be this way- power off is actually display (only) off. THIS is why the batteries go bad quickly.
  
−
At 0.7A and 25deg junction temp, voltage per LED varies between 3.03(min), 3.7(typ), 4.47(max). And 3.9V(typ) at 1A current.
+
I just open the caliper case, cut the battery trace (which one doesn’t matter), drill two holes to allow the fine (wire wrap) wire to come out the top to a micro-miniature slide switch glued to the top. I always turn the switch off, rather than press some caliper “off” button, and find that a button cell lasts for many years. I would attach a picture if Sparkfun allowed, but it doesn’t. Caliper thickness is unchanged, and the outline is very nearly unchanged.
 +
|-
 +
|'''temperature controller'''|| plan || to control cooker for soldering SMD.
 +
# ssr to control power to heating plate
 +
# type k thermocouple to measure temperature
 +
# attiny 84a dip
 +
# usb/serial converter to talk to netbook
 +
* solder-less breadboard with banana-sockets to link 2 through 4
 +
|-
 +
|}
  
−
Some uncertaintity - current might just get to 0.5 A but I am sure the junction will be hotter than 25C, and see but no indication of change in V drop with temp in the datasheet :(.
+
==Crazy Ideas==
 +
{|border="1" cellpadding="5" cellspacing="0"
 +
|'''Project''' || '''Status''' || '''Notes'''
 +
|-
 +
|'''Infer unit-testcases from a functions code'''|| thought || Summary: Use the parse tree for a function as input to heuristically apply symbolic logic that aims to build information about the values of parameters required to invoke particular functionality with-in the function.
 +
So for example given a function "uint32_t f(uint32_t i, std::string s)", it starts with a range of possible inputs of (i in [0,2^32-1] x (s.size() in [0,2^32]) x [set-of-possible-values-of-actual-length]) , which is nearly infinite.
 +
Then from the parse tree, derive the possible effects of the code, and the sub-ranges of the inputs that are required to have these effects.
  
 +
|-
 +
|'''prime number generator'''|| thought || Invert the sieve of Aristophanes, so the data structure holds primes and the next multiple of each prime. Keep the data-structure sorted by the next multiple. When a gap occurs between the current nearest multiple and the next nearest the gap contains prime number(s).
 +
The algorithm requires sorting subsequent multiples into place.
 +
If N is the number of discovered primes N, and the size of the primes is S; then the memory used is O(N*S) and the
 +
CPU time used is O(S*N*N).
  
−
Assume 4.0V per LED - gives 16V for 4 LEDs, and 24V for 6 LEDs.
+
Other thoughts:
 +
* use wheel factorisation of the first M primes to compactly and efficiently represent the impact of these first M primes, where M is chosen so the product of these primes fit in a machine word, and so that the primes less than the product fit in affordable memory.
 +
* use interval arithmetic to keep track of the intermediate numbers.
 +
* can it be fitted to hardware?
 +
|-
 +
|'''factorisation'''|| thought || By trial division using list of known primes; is exceedingly slow for large numbers; the number of potential factors is O(sqrt(N)) - if N is more than 100 bits that is a big number.  However, can knowledge of the factors be used to restrict the search space usefully? What are the constraints on the factors imposed by PGP for example
 +
|-
 +
|}
  
−
Am expecting 4x30deg, 3x15deg and 3x5deg reflecters.
+
==Dead Ideas==
−
 
+
{|border="1" cellpadding="5" cellspacing="0"
−
Originally thinking of four LED strings
+
|'''Project''' || '''Status''' || '''Notes'''  
−
# - very low speed - just a 120 deg med power LED (with voltage doubler to get the reqd V)
+
|-
−
# - low speed - one 30deg
+
|'''mirrored coils'''|| reinventing the wheel; already exists as a [http://en.wikipedia.org/wiki/Choke_%28electronics%29#Common-mode_choke ''Common mode choke''] || wind two coils on the same core, one left hand the other right hand and link them together. I think they should act as a filter of some sort, because the emf generated by the first travels faster than the electrons and reinforces the current in the other coil, smoothing out the edges of each pulse. The filter frequency being related to the speed of light and electrons in copper and the coil winding length. Maybe there would be less energy lost in the filter?
−
# - med speed - one 30deg, one 15deg
+
I need to learn some maths so I can understand the wiki explanation.  
−
# - high speed - one 15deg, two 5deg
+
|-
−
 
+
|}
−
Of course, the length of the strings depend on the V generated by my bike speed.. so not really predictable
+
==Completed projects==
−
 
+
{|border="1" cellpadding="5" cellspacing="0"
−
Simplify (only last 3 strings) and no V doubler.
+
|'''Project''' || '''Status''' || '''Notes'''
−
 
+
|-
−
===thinking space===
+
|'''Lowered Desk'''|| complete || Comfort requires a good desk:). [http://wiki.london.hackspace.org.uk/view/Project:Lowered_Desk Project:Lowered Desk]
−
 
+
|}
−
New link [http://www.mikrocontroller.net/attachment/14850/BikeLight.pdf on impedance matching and MCU control] of bike lights :).  I am not sure what this means for my circuit and plans.
+
==Project Status==
−
 
+
See [http://wiki.london.hackspace.org.uk/view/Project:SpeedAdjustableBikeLight Speed Adjustable Bike Light]
−
==Indicator LED==
 
−
 
 
−
The voltage regulator requires some current draw for stability, and I dont want it to go haywire is the MCU stops n a breakpoint and dosnt eat enuf current... and I would like to have an 'I am working LED' that is pointing at me...
 
−
 
 
−
The minimum current is 1mA, so I have picked a 2mA red LED (should preserve night vision and show up well during the day) from Farnells catalog.
 
−
* [http://uk.farnell.com/vishay/vlms30k1l2-gs08/led-plcc2-red/dp/1328349 18mcd, 60degree, SMD LED] looks fancy in the jpg and is cheap - £0.51 for 5.
 
−
 
 
−
==Switches for LED current==
 
−
* This [http://uk.farnell.com/diodes-inc/zxms6005dt8ta/mosfet-nn-ch-w-esd-60v-1-8a-sm8/dp/1902497 SMD Dual Logic Level MOSFET] will control two sets of LEDs directly from the MCU - given enough heat-sink capability on the board and enough voltage from the MCU (3.3 or 5v compatibke , Has ESD, over temp and over current protection... is really tiny! If the logic level REALLY needs to be 3.3v then that is an issue :( 3.3v logic turns into about +3.45v regulator (3.3v + a 200mV diode drop to allow the MCU tp be reprogramed in circuit) with 415mV regulation margin - nearly 4v reqd for the MCU.. when the LEDs start to light up near 3v :(.
 
−
 
 
−
* This [http://uk.farnell.com/stmicroelectronics/stp16nf06l/mosfet-n-ch-60v-16a-to220/dp/9803068 TO220 MOSFET] should carry the 0.5a curent - perhaps without any heatsinking at all. and combined with a small transister should operate well at a supply voltage of 3v.
 
−
 
 
−
* This [http://uk.farnell.com/nxp/pmn34un-135/mosfet-n-ch-30v-4-9a-sot457/dp/1758106 PNM34UN] is 2A mosfet, with Rds of 0.08 at 1.8V throu to about 0.05 at 4.5V; max Vds of 30V; £0.16 each. there are several similar parts at Vds 30V for a bit more money. [http://www.digikey.co.uk/product-detail/en/PMN34UN,135/568-7420-1-ND/2698079 digikey ] is more expensive for this part.
 
−
 
 
−
* [http://uk.farnell.com/nxp/pmn27un-135/mosfet-n-ch-20v-5-7a-sot457/dp/1758104 PMN27UN] is similiar to the above; but 20V max Vds with a bit smaller Rds(on) - also marginally cheaper.
 
−
 
 
−
There are a few impacts of this choice..
 
−
* SMD or through hole!!!
 
−
* Many fewer devices from the SMD integrated logic level MOSFETS
 
−
* Higher operating voltages might be required by the SMD MOSFETs
 
−
 
 
−
I need to establish the maximmum operating voltage!
 
−
 
 
−
==Voltage regulator for the MCU==
 
−
Needs to operate of a widely varied supply voltage. The dynamo generates a voltage proportional to the bike speed. Potentially reaching hundreds of volts. And the higher the voltage climbs, the more power I can use in the LEDs! Many components to deal with 0.5A are specced at about 40 to 60V - so that is a very high limit for the working voltage. A chain of 6 LEDs would need 24v. My plans are for 3 LEDs in a chain - so 20V is a good target.
 
−
MCU Vcc of 3V (supporting 10MHz clock) these are some possible regulators.
 
−
* [http://uk.farnell.com/national-semiconductor/lm2936mp-3-0-nopb/ic-ldo-volt-reg-3v-50ma-sot-223/dp/1496125 3.0v, 200mV drop out, 50 mA, max 40v supply] from a 3.2V diode bridge supply :). It is a 4 pin SMD device for £1.60.
 
−
* [http://uk.farnell.com/national-semiconductor/lp2980im5-3-0-nopb/ic-ldo-volt-reg-3v-50ma-5-sot-23/dp/1559574 3.0v, 120mV drop out, 50mA, 16V max supply] will do above from a 3.12V supply, but restricts me to chains of fewer than four LEDs. £0.46
 
−
* [http://uk.farnell.com/on-semiconductor/lp2950cz-3-0g/ic-ldo-volt-reg-3v-0-1a-to-92-3/dp/1354344 3v, 350mV drop out, 100mA, 30V max supply] is a small 3 pin through hole package for £0.46. Required voltage is now 3.35V :(.
 
−
 
 
−
MCU Vcc of 2.5V (max clock of 8Mhz)
 
−
* [http://uk.farnell.com/linear-technology/lt1761es5-2-5-pbf/ic-ldo-volt-reg-2-5v-0-1a-5-tsot/dp/1531492 a 2.5V, 300mV drop out, 100mA, 20V max power supply] will allow operation at 2.8V:).
 
−
 
 
−
==Adjustable voltage regulators==
 
−
These seem like they offer the voltage reqd (order of 2.5 to 2.7V) at acceptable dropout voltages - order of 0.3V.
 
−
 
 
−
But the fine print is hard to follow, so far I have investigated several families to find either I can not understand them or they have secondary voltage requirments above 4V;
 
−
 
 
−
* [http://uk.farnell.com/linear-technology/lt3080est-pbf/ic-adj-ldo-reg-0v-to-36v-1-1a-sot/dp/1556601 LT3080EST three pin regulator] requires a source voltage > 1.25V higher than output although Farnel calls it a 350mV dropout :(. 2.7+1.25 is nearly 4V, way after the LEDs have lit up. This is Farnell missing the note in the datasheet, and quoting the voltage dropout for a different part in the family.
 
−
 
 
−
* [http://uk.farnell.com/on-semiconductor/lm2931ctg/v-reg-ldo-adj-3-24v-2931-to2205/dp/1211139 LM2931CTG automotive volt regulator] This guy is just plain confusing. There are about 10 extra components in the application circuit. The guidance for selection of the output capacitor sent me of to work out the resonant freqency of tantalum caps. For which I apparently need the equivalent series inductance (ESL) - which no devices I looked at on Farnell mentioned in the datasheet, and this is the easy  components. Meanwhile, I recall that I am advised to increase the size of the capacitor because the operating voltage is low.. by an unspecified amount. Next.
 
−
 
 
−
 
 
−
* [http://uk.farnell.com/micrel-semiconductor/mic2941awu/ic-reg-ldo-1-25a-adj/dp/1556739 MIC2941AWU automotive voltage regulator] is restricted to 4.3V inputs at temp != 25degrees. Confused? Yes, definitely. The datasheet has headline operating parameters specified for 25 degrees - that appear in the first page product blurb, and much more constrained parameters for the for the full tempreture range of -40 to +125degrees. Naturally the blurb claims the regulator operates from -40 to +125degrees. To cap it off there is no derating guidance. I am not used to datasheets being written by sales droids. Next.
 
−
 
 
−
* [http://uk.farnell.com/on-semiconductor/ncv4276adsadjg/ic-voltage-regulator/dp/1703366 NCV4276] minimum input is 4.5V - just Farnell's search tool not dealing with input voltage ranges.
 
−
 
 
−
* [http://uk.farnell.com/micrel-semiconductor/mic29152wu/ic-v-reg-ldo-1-5a-adj-smd-29152/dp/1100648 MIC29152WU 1.5A Adj] might be an ok regulator. It is 26V input continuous, 50V 10mSec spikes. 5mA minimum load. Unfortunately, the datasheet is ambiguous. The headline voltage dropout figure is 340mV, but all the electrical characteristics are quoted for 1V margin over the regulated voltage... so not sure how well it will do the job...
 
−
 
 
−
And there appears to be a better choice..
 
−
* [http://uk.farnell.com/linear-technology/lt3008edc-pbf/ic-adj-ldo-reg-0-6v-to-44-5v-20ma/dp/1692192 LT3008 20mA 0.6 to 44V] 200mV dropout, or 500mV at higher tempreture. Since high temp is associated with daylight or lots of wasted power this should be fine. Needs a resister network, and two caps.
 
−
 
 
−
==digikey options..==
 
−
 
 
−
* [http://www.digikey.co.uk/product-detail/en/LT3008ETS8-2.5%23TRMPBF/LT3008ETS8-2.5%23TRMPBFTR-ND/2074413 LT3008 2.5V fixed] from Digi-Key. Is easier to check for alignment on board. Doesn't need the resister network. And is cheaper.
 
−
 
 
−
==Diodes for rectifying AC ==
 
−
This diode should allow be low voltage drop - to get the LEDs working at lower speeds.
 
−
Need to be >10V barrier. Higher barrier gives higher drops. So chosen 15V barrier diode.
 
−
 
 
−
* [http://uk.farnell.com/vishay-formerly-i-r/10bq015trpbf/schottky-rectifier-1a/dp/1651136 1A, 360mV fwd voltage drop]
 
−
 
 
−
== light sensor ==
 
−
 
 
−
All the Farnell photo-resistors are through hole; makes sense I guess as that way they can be poked through a hole in the casing.
 
−
 
 
−
* [http://uk.farnell.com/excelitas-tech/vt90n2/ldr-series-vt900/dp/1652637 photo-resistor or LDR ] is cheapest at £0.27 - now to find out how to use it, and if there is a reason to spend more.
 
−
 
 
−
== 20V, 30V or 60V diode bridge. ==
 
−
 
 
−
From what I read yesterday, the voltage drop of a schottky diode is a function of the junction temp, the current passed, the reverse voltage barrier, and the size of the diode junction (which I guess becomes cost).
 
−
There is this [http://uk.farnell.com/vishay-formerly-i-r/vs-95sq015/diode-schottky-9a-15v/dp/506795 £3.19 diode 9A/15V] that has a Vf for 1A at 25C less than 250mV. If you could heat the junction to 100C it would be about .1V!! AT 100mA it is less than 200mV Vf.
 
−
 
 
−
Since the voltage out of the dynamo is essentially a function of the road speed, it could be quite high. leading to my difficulties in finding low Vf diodes..
 
−
 
 
−
If I put a pair of zener diodes across the output of the dynamo - before the rectifier, then the rest of the circuit is limited to only that voltage, and the diodes in the bridge recifier are limited to half of that.
 
−
 
 
−
I am not sure if 20V or 30V is the right target voltage for the rectifier. Higher voltages get more complex, as larger logic level MOSFETs seem to need 5.5 to 4.5V gate voltages rather than 3V, 2.5V or even 1.8V.  Also, low-drop-out v-reg that will take > 30V as input are rare.
 
−
 
 
−
I am leaning towards 20V (or 18V to split the diff between LEDs and specs).
 
−
 
 
−
 
 
−
If 20V then [http://uk.farnell.com/on-semiconductor/mbrs410lt3g/schottky-rectifier/dp/1702812 10V/1A] seems a useful diode to rectify 0.5A with low losses.
 
−
 
 
−
* [http://uk.farnell.com/nxp/pmeg1020ev/diode-schottky-sot-666/dp/8737835 2A 250mV drop at 0.5A] 10 for a £ :)
 
−
 
 
−
== MCU programming ==
 
−
 
 
−
All AVR MCUs come with debugWire disabled :( - see [http://www.atmel.com/Images/doc2562.pdf Connecting to a board with JTAG MK2].
 
−
 
 
−
To enable debugWire  I need to use ISP/ which needs MISO,MOSI,SCK and RESET, VCC, and GND!  Can do with the DIP by programming before putting in the board; using a socket.
 
−
 
 
−
I wonder how the users of SMD packages manage it?
 
−
 
 
−
== rough design ==
 
−
 
 
−
* dynamo->AC
 
−
* AC->2 crossed 5% 19V zener diodes to clip(+/- 5% -> 18 to 20V output) to safe range of rest of system
 
−
* AC->diode bridge->DC (using 10-15V diodes, loose .5V so 17.5 to 19.5 max V)
 
−
* (three of)DC->LED strings->logic level 20V mosfets->GND
 
−
* DC->2.5V reg->Vcc->MCU->GND (requires DC >= 2.8V)
 
−
* AC->diode-> 100k resister->(MCU int0 pin)->2.5V zener diode->GND
 
−
* MCU_reset->Reset_debugWire->100k resistor->Vcc
 
−
* MCU_[3*gpios]->MOSFET Gates
 
−
* DC->1M resister->MOSFET_on->2.7V zener diode->GND (hardware default this MOSFET to on)
 
−
* MOSFET_off(two off)->1M resistor->GND (hardware default these MOSFETs to off)
 
−
* Vcc->LightDependentResistor->MCU_[ADC]->10k resistor->GND
 
−
(Micro-controller programming)
 
−
* DC->prog supply pin
 
−
* Vcc->Vref_debugWire
 
−
* Gnd->Gnd_debugWire
 
−
 
 
−
NOTES
 
−
If the LEDs light up below 2.8V, then I need to think about lower voltage supply for MCU.
 
−
 
 
−
One LED string should default to ON - so that while the MCU is booting there is a power consumer to stop capacitors charging to unsafe voltages.
 
−
 
 
−
Not sure what the failure modes are and what protection should be added.
 
−
 
 
−
Plans for cooling of LEDs are still vaugue.
 
−
 
 
−
== firmware design ==
 
−
===pseudo code===
 
−
<nowiki>
 
−
 
 
−
isr(int0)
 
−
{
 
−
freq++ ;
 
−
}
 
−
 
 
−
isr(counter_2_overflow)
 
−
{
 
−
// copy current freq to main line, reset freq.
 
−
}
 
−
 
 
−
isr(adc_complete)
 
−
{
 
−
copy adc value to mainline;
 
−
}
 
−
 
 
−
isr(counter1_...)
 
−
{
 
−
// implement the lighting policy
 
−
?flip the current MOSFETs bit..
 
−
?change the current MOSFET
 
−
?change the counter target
 
−
}
 
−
 
 
−
void
 
−
main()
 
−
{
 
−
setup() ; // set the ports, direction etc.
 
−
for(;;)
 
−
  {
 
−
  if (newFreq)
 
−
  {
 
−
    {
 
−
    DISABLE_ISR ;
 
−
    copy new freq ;
 
−
    }
 
−
  if new freq != old freq
 
−
    adjust policy;
 
−
  }
 
−
  if (newLumons)
 
−
  {
 
−
    {
 
−
    DISABLE_ISR;
 
−
    copy new lumons;
 
−
    }
 
−
  if new lumons != old lumons
 
−
    adjust policy ;
 
−
  }
 
−
  }
 
−
}
 
−
</nowiki>
 
−
 
 
−
===inputs and conditioning===
 
−
===policy ideas===
 
−
# if it is dark provide constant light immediately.
 
−
# if it becomes light, wait for a few seconds to confim it stays light, and then start flashing the lights to make it easier for others to see the bike.
 
−
# as the speed increases, spend more time with tightly focussed lights lit
 
−
# as the speed decreases, spend more time with flood lights lit.
 
−
* Flashing LEDs use less power, maybe can lit up high speed strings at lower speeds?
 
−
* Flashing LEDs have higher power limits, so should be able to flash low speed floods even at high speed - to get attention from road users at large angles to the bikes direction of travel.
 
−
* Aim to match the power available to the power consumed by the LED strings
 
−
 
 
−
===policy mechanism===
 
−
Four intervals of variable length, applied to selected string of LEDs: off, string-a on, off, string-b on.
 
−
 
 
−
The intervals are defined as an array of counter[4]. The LED strings by the MOSFET number in an array of mosfet[4];
 
−
 
 
−
This will allow:
 
−
* the fading from spots to floods gradually:).
 
  
−
* day lashing patterns to be set using any two strings of LEDs.
+
==Parts Shopping==
 +
[http://search.digikey.com/us/en/products/GTCA28-421M-R05-2/GTCA28-421M-R05CT-ND/2931568 GDT 420v] surge arrestor for 240v (if my calculations are right)
  
−
===policy config===
+
[http://search.digikey.com/us/en/products/ED110%2F2DS/ED1605-ND/33880 wire to board screw connectors] 300V 20A
−
* night vs day lumonosity value.
 
−
* samples of day light required for flashing to start.
 
−
* freq exponential smoothing factor (power of 2)
 
−
* night freq bounds[4] between {floods | mix | medium | mix | spots}
 
−
* day freq bounds[N] between flash patterns
 
−
* day flash patterns[N]
 
  
−
===user config===
+
[http://search.digikey.com/us/en/products/ELXZ500ELL222MM35S/565-2018-ND/756534 Electrolytic Cap] 50v, 2200uF, 8k hours lifetime, 3A ripple current, 23mOhm inductance, ?ESR.
−
policy values in miles per hour?
 
−
or are they automated from load/power info?
 

Latest revision as of 07:46, 24 October 2014

Dave Brown playing for a while:)

Project intended to progress sometime in the future

Project Status Notes
Reconfigurable sailing proa mostly inactive, built small bits Rob Denny at http://www.harryproa.com has some interesting things to say about Proas and how they could be the basis for a cheap, high performance, spacious sailing cruising boat. Perhaps the ideal cruising boat :). I want to explore the sailing characteristics in a model.
LED lights and lenses for my bike active http://pilom.com/BicycleElectronics/DynamoCircuits.htm explains the matching of LEDs to bike generators. I plan to have several strings of LEDs with different beam angles and aiming points - and the appropriate string of LEDs turned on for the current bike speed.

Success criteria:

  • generate some light at low speed
  • generate more light at high speed
  • get it too work
  • don't break the bank
Visible surge arrestor project I want to know when power surges happen, and if possible stop them cheaply and quickly. Project:Surge Arrestor
Low viscosity blood thoughts I have some more reading to do; but am intrigued by http://customers.hbci.com/~wenonah/new/mcdaniel.htm and http://en.wikipedia.org/wiki/Integrated_Pulmonary_Index
Quiet boxed PCs project I want to run more than one PC, and the droning gets to me :( Project: Quiet Boxed PCs

Project Ideas

Project Status Notes
Power efficient raid idea Data needs to be written to multiple drives; so a single head-crash does not wipe it out. However, it could be staged to disks sequentially, remaining in memory until it has been written on the 2nd (or n'th) drive. The drives could be spun up more rarely, to simply update the file-store.

Perhaps it can be done using two or more file systems and unionfs; with the data eventually residing on a spinning disk, but initially being saved on ssd. The spinning disk using btrfs to make a sequence of stable snapshots from changes preserved on the ssd. Maybe btrfs offers this sort of thing directly?

Make solar cell? idea Link http://www.freewebs.com/acselectronics/TiO2solar.html
Safe by design nuclear meme 2 hour promo
bike trailer sketches on envelopes to carry standard building 2.44 x 1.22 M sheets, 2up kayak, etc. Considering
  • extending the bike rack so the trailer can be carried inverted over the rack;
  • wheel mounts that can be pivoted to vary the trailers wheelbase
    • narrow for storage on bike
    • wider for normal use
    • extra wide to control the windage of a building sheet
tricycle just a thought Means of getting around...
hack caliphers seen in sparkfun comments Member #333257

If you measure current, you will see that the power off state draws 90% of the current of the power on state. For some reason, all electronic calipers seem to be this way- power off is actually display (only) off. THIS is why the batteries go bad quickly.

I just open the caliper case, cut the battery trace (which one doesn’t matter), drill two holes to allow the fine (wire wrap) wire to come out the top to a micro-miniature slide switch glued to the top. I always turn the switch off, rather than press some caliper “off” button, and find that a button cell lasts for many years. I would attach a picture if Sparkfun allowed, but it doesn’t. Caliper thickness is unchanged, and the outline is very nearly unchanged.

temperature controller plan to control cooker for soldering SMD.
  1. ssr to control power to heating plate
  2. type k thermocouple to measure temperature
  3. attiny 84a dip
  4. usb/serial converter to talk to netbook
  • solder-less breadboard with banana-sockets to link 2 through 4

Crazy Ideas

Project Status Notes
Infer unit-testcases from a functions code thought Summary: Use the parse tree for a function as input to heuristically apply symbolic logic that aims to build information about the values of parameters required to invoke particular functionality with-in the function.

So for example given a function "uint32_t f(uint32_t i, std::string s)", it starts with a range of possible inputs of (i in [0,2^32-1] x (s.size() in [0,2^32]) x [set-of-possible-values-of-actual-length]) , which is nearly infinite. Then from the parse tree, derive the possible effects of the code, and the sub-ranges of the inputs that are required to have these effects.

prime number generator thought Invert the sieve of Aristophanes, so the data structure holds primes and the next multiple of each prime. Keep the data-structure sorted by the next multiple. When a gap occurs between the current nearest multiple and the next nearest the gap contains prime number(s).

The algorithm requires sorting subsequent multiples into place. If N is the number of discovered primes N, and the size of the primes is S; then the memory used is O(N*S) and the CPU time used is O(S*N*N).

Other thoughts:

  • use wheel factorisation of the first M primes to compactly and efficiently represent the impact of these first M primes, where M is chosen so the product of these primes fit in a machine word, and so that the primes less than the product fit in affordable memory.
  • use interval arithmetic to keep track of the intermediate numbers.
  • can it be fitted to hardware?
factorisation thought By trial division using list of known primes; is exceedingly slow for large numbers; the number of potential factors is O(sqrt(N)) - if N is more than 100 bits that is a big number. However, can knowledge of the factors be used to restrict the search space usefully? What are the constraints on the factors imposed by PGP for example

Dead Ideas

Project Status Notes
mirrored coils reinventing the wheel; already exists as a Common mode choke wind two coils on the same core, one left hand the other right hand and link them together. I think they should act as a filter of some sort, because the emf generated by the first travels faster than the electrons and reinforces the current in the other coil, smoothing out the edges of each pulse. The filter frequency being related to the speed of light and electrons in copper and the coil winding length. Maybe there would be less energy lost in the filter?

I need to learn some maths so I can understand the wiki explanation.

Completed projects

Project Status Notes
Lowered Desk complete Comfort requires a good desk:). Project:Lowered Desk

Project Status

See Speed Adjustable Bike Light

Parts Shopping

GDT 420v surge arrestor for 240v (if my calculations are right)

wire to board screw connectors 300V 20A

Electrolytic Cap 50v, 2200uF, 8k hours lifetime, 3A ripple current, 23mOhm inductance, ?ESR.

Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=User_talk:Daveb&oldid=43525’