View source for Bench Buffer & Polisher (Clarke CBB250)

{{EquipmentInfobox
|name=Buffer & Polisher (Clarke CBB250)
|image=Clarke CBB250.jpg
|model=Clarke CBB250
|category=Equipment
|subcat=Metalworking
|status=good working order
|reqtraining=no
|acnode=no
|location=Fab Shop
|maintainers=Metalshop team
}}
A polishing/ buffing machine used for cleaning metal surfaces and bringing them to a high polish

A box of mops and polishes is located on the back of the machine. Unfortunately none are labelled so trial an error have to be used to find the aggressiveness of each grade of compound.
Personally I've found the large red block works well for roughing and the small green one good for fine polishing in brass

An M20 adaptor spindle has recently been made which allows a wire brush to be mounted to the machine, helpful in the initial stages of cleaning and prepping for painting. The polishing spindle can be easily re-inserted by changing the grub screws. Wear gloves and eye protection when using the wire brush as it will shed bristles during use

Acquired by donation in 2025

{{:Risk Assessment/ Stationary Grinders}}