Pledge: Collet Chuck

From London Hackspace Wiki
Jump to: navigation, search

We are looking at purchasing a collet chuck and backing plate for the space. Pledge opened: 01.06.2019

Pledge leader: deanforbes

The item

The lathe is great but it is really not possible to work on smaller bits safely or accurately the new collet chuck will enable us to work on material between 1 and 20 mm safely or accurately

There has been good support for this and it has kind of would up being a successful shopping list - thanks for all the support :-)

  • lathe chuck and backplate

Budget estimation

  • Backplate £41.22 Inc.VAT
  • Chuck £59.90 Inc.VAT

Part Two

  • Mag Magnetic Base £21.76
  • Dial Indicator Pin Type £8.96
  • Dial Indicator Finger £16.99

Part Three

  • 1/2 Inch Torque wrench £21.95

Pledges

  • £10 -- ____ -- Des Quilty
  • £20 -- CASH -- Dean Forbes
  • £20 -- ____ -- Mike Karliner
  • £20 -- CASH -- Liam Lynch
  • £10 -- CASH-- Andrew Ruegg
  • £20 -- PAID -- Jonathan Hodgson
  • £20 -- PAID -- AJP2
  • £20 -- CASH -- Richard Wood
  • £20 -- CASH -- Tim Jacobs

Payment

Please pay in your pledges into the hackspace account directly (same as membership) account and make sure to use the reference Collet_Chuck, once paid please mark them as PAID on this page .


Running total: £160

Approximate target: £162

Paid UP: £130

Cash Received £90.00