Project:Bloodbowl Scoreboard: Difference between revisions

Project:Bloodbowl Scoreboard (view source)

315 bytes added , 22 February 2011

63

edits

Revision as of 13:07, 21 February 2011 (view source) Bluekieran (talk \| contribs) (→‎The Next Step...) ← Older edit		Revision as of 16:02, 22 February 2011 (view source) Bluekieran (talk \| contribs) (→‎The Next Step...) Newer edit →
Line 53:		Line 53:

	I've ordered some more LEDs, LED drivers, 7-segment displays, shift registers and IC sockets for same. I want to put together a board that contains just the 48-LED turn counter, the reroll counters on 7-segment displays, the 8x8 turn counter and the drivers/shift registers to handle all of those. I'll also need to include pin headers on the board so it can be cabled back to the main arduino board and to the power supply.		I've ordered some more LEDs, LED drivers, 7-segment displays, shift registers and IC sockets for same. I want to put together a board that contains just the 48-LED turn counter, the reroll counters on 7-segment displays, the 8x8 turn counter and the drivers/shift registers to handle all of those. I'll also need to include pin headers on the board so it can be cabled back to the main arduino board and to the power supply.

			Looks like the maximum size of board I'll be able to expose is 12" long, so given the length of the finished item and the fact that the turn counter is mean to span it, I'll have to split that over two boards. I've ordered some 12" x 9" double-sided PCB laminate and am trying to design the circuit in ExpressSCH.