1,649
edits
Project:Spacensus: Difference between revisions
From London Hackspace Wiki
no edit summary
No edit summary |
No edit summary |
||
| Line 25: | Line 25: | ||
* The [https://github.com/londonhackspace/spacensus python script] that provides the data to cacti implements only the 'poll for status' command, but will later allow more control and configuration of the counting sensors. | * The [https://github.com/londonhackspace/spacensus python script] that provides the data to cacti implements only the 'poll for status' command, but will later allow more control and configuration of the counting sensors. | ||
== | ==Instructions== | ||
====Powering off==== | ====Powering off==== | ||
# Remove the USB cable from the side of the unit. | # Remove the USB cable from the side of the unit. | ||
# Remove the 12VDC jack from the side of the unit. | # Remove the 12VDC jack from the side of the unit. | ||
# Check the beams are no longer emitted and that no sensor indicators are illuminated. | # Check the beams are no longer emitted and that no sensor indicators are illuminated. | ||
====Location==== | |||
The [http://www.flickr.com/photos/travelbot/5421523049/ current mounting location] has the lasers In close proximity in the middle of the entrance way. To avoid issues with occlusion of beams by coats etc, the coat hooks have been moved to the next wall along, with the lab coats. This arrangement greatly simplifies the detection of the true direction of someone entering/leaving the space. Detection works reasonably well. | |||
====Safety signs==== | ====Safety signs==== | ||
{| | {| | ||
