Project:PizzaPrinter: Difference between revisions
From London Hackspace Wiki
→Liquid dispensers
| Line 42: | Line 42: | ||
*** This one looks 300x easier to make though http://www.thingiverse.com/thing:5265 --[[user:ciaran.mooney|Ciarán]] | *** This one looks 300x easier to make though http://www.thingiverse.com/thing:5265 --[[user:ciaran.mooney|Ciarán]] | ||
**Could also use a suction placement - mostly good for pick & place salami etc. but might also suck liquid up a short tube then blow it down : able to use the same mechanism for both solids and liquid dispensing. | **Could also use a suction placement - mostly good for pick & place salami etc. but might also suck liquid up a short tube then blow it down : able to use the same mechanism for both solids and liquid dispensing. | ||
** I have the motor mechanism (with gearbox and speed control) for a large peristaltic pump. It needs the roller and tube mechanism building. | ** I have the motor mechanism (with gearbox and speed control) for a large peristaltic pump. It needs the roller and tube mechanism building. - artag | ||
=== Slicing dispensers === | === Slicing dispensers === | ||
