Anonymous

Equipment/Babbage/LogBook: Difference between revisions

From London Hackspace Wiki
Restart 2011-04-27 by ms7821
(Restart 2011-04-27 by ms7821)
Line 1: Line 1:
=== 27/4/2011 [[User:Ms7821|Mark]] ===
Shut down Babbage to install new USB card due to repeated issues with bus overpowering.
* '''Shut down''' at 19:52:32.
* After opening, decided to hoover the inside as it had picked up a huge amount of dust
* Babbage only has one 5v PCI socket, which was being used by the video capture card for the door camera. After a quick chat with Jasper, we decided it would be best to get a USB capture device instead, in return for more USB sockets.
* '''Restarted''' at 20:17:08.
* On restarting, no F1 message was required, although it flashed up "unbootable system drive" (or similar) monentarily before booting off the hard disk.
* Service init stopped for about 10 minutes after starting Mysql daemon. I'm not sure whether this is normal. I could log in without any problem on tty2 and access the network. The next service to start was gpm. I wonder whether this was due to the he-6in4 tunnel.
* Plugging the printer in still caused errors (device descriptor read/64, error -71), but replacing the cable fixed this.
* I've restarted all the services I can in screen:
** All the doorbot-listeners are in one session
** camtemp.single.py is in the same session as netcamfix
* I've disabled thread 3 on motion (the door camera) until we get a replacement
* I've left ~ms7821/screen.txt with the previous list of screen sessions for root
Other things noticed:
* mrchrisadams has his HereNow daemon still running off cron.
* All the startup stuff should be run off init or cron.
* Boarded needs to have its ports tied with udev.
* The light on the front is no longer flashing orange, which is nice.
People who had screen session PIDs:
* solexious/record
* aether
* samthetechie
* SamLR
===27/4/2011 [[User:Artag|Artag]] ===
===27/4/2011 [[User:Artag|Artag]] ===


Anonymous user