Equipment/Makerbot Cupcake/LogBook: Difference between revisions
From London Hackspace Wiki
Equipment/Makerbot Cupcake/LogBook (view source)
Revision as of 21:35, 27 April 2011
, 27 April 2011→Logbook
| Line 1: | Line 1: | ||
==Logbook== | ==Logbook== | ||
===22/4/2011=== | ===22/4/2011 Operator: Kal=== | ||
Someone used it without entering into the logbook, Rob, judging from the preloaded .stl. | Someone used it without entering into the logbook, Rob, judging from the preloaded .stl. | ||
I played around with settings some more to try and improve the print quality. | I played around with settings some more to try and improve the print quality. | ||
It is now Broken. Half way through a print of Prusa bushing the extruder simply stopped extruding (the makerbot continued until I stopped it). I have tried to restart it, reset the boards etc. All controls work fine and the extruder is heating up as it should. It simply wont switch the motor on to extrude the plastic, it wasn't knocked or touched, so I doubt it is a wiring problem, I simply think the motor has given out..... | |||
===21/4/2011 Operator: Glen=== | ===21/4/2011 Operator: Glen=== | ||
I've added a key to the Makerbot. The key is to be used to turn the Makerbot on and off, the switch on the motherboard no longer works. | I've added a key to the Makerbot. The key is to be used to turn the Makerbot on and off, the switch on the motherboard no longer works. | ||
