Project:Nanode/Building a Nanode: Difference between revisions

Project:Nanode/Building a Nanode (view source)

47 bytes added , 6 June 2011

no edit summary

552

edits

@@ Line 85: / Line 85: @@
 ==Step 9==
-Add the 25MHz crystal marked 25.00SCA. Crystals should be inserted so that the top lies flush with the top of the adjacent IC socket.
+Add the 25MHz crystal marked 25.00SCA. Crystals should be inserted so that they are lifted approximately 1mm above the pcb to prevent possibilty of metal can shorting to vias beneath.
-[[File:9_add_25MHz_crystal.jpg|800px|center|thumb|Add the 25MHz crystal so its flush with the nearby IC socket]]
+ [[File:11_add_25MHz_crystal.jpg|800px|center|thumb|Add the 25MHz crystal so it is about 1mm above the board]]
@@ Line 94: / Line 94: @@
 Add the 16MHz crystal  marked 16.00SCA
-[[File:10_add_16MHz_crystal.jpg|800px|center|thumb|Add the 16MHz crystal making it flush with the IC socket ]]
+[[File:10_add_16MHz_crystal.jpg|800px|center|thumb|Add the 16MHz crystal so it is about 1mm above the board]]