552
edits
Project:Nanode/Building a Nanode: Difference between revisions
From London Hackspace Wiki
→Step 1
(→Step 1) |
(→Step 1) |
||
| Line 14: | Line 14: | ||
Everything should be supplied in a pink antistatic plastic "zip" bag. This early photo shows two 10R resistors - whereas there is only one needed. | Everything should be supplied in a pink antistatic plastic "zip" bag. This early photo shows two 10R resistors - whereas there is only one needed. | ||
If you have one of the later kits, you should find that the tiny MAC address IC has already been soldered in place on the back of the PCB. | |||
This is the safest place to put it - as it would be very easily lost of put separately in with the rest of the kit components. | |||
[[File:Position_MAC.jpg|800px|center|thumb|On the back of the pcb, on later kits, the tiny SMT MAC chip will have been already soldered in place for safe keeping]] | [[File:Position_MAC.jpg|800px|center|thumb|On the back of the pcb, on later kits, the tiny SMT MAC chip will have been already soldered in place for safe keeping]] | ||
