552
edits
Project:Nanode/Building a Nanode: Difference between revisions
From London Hackspace Wiki
→Step 1
(→Step 1) |
(→Step 1) |
||
| Line 14: | Line 14: | ||
Everything should be supplied in a pink antistatic plastic "zip" bag. This early photo shows two 10R resistors - whereas there is only one needed. | Everything should be supplied in a pink antistatic plastic "zip" bag. This early photo shows two 10R resistors - whereas there is only one needed. | ||
'''MAC Chip''' | |||
If you have one of the later kits, you should find that the tiny MAC address IC has already been soldered in place on the back of the PCB. | If you have one of the later kits, you should find that the tiny MAC address IC has already been soldered in place on the back of the PCB. | ||
