Project:Nanode/Applications/Bootstrap config files: Difference between revisions

Project:Nanode/Applications/Bootstrap config files (view source)

1 byte added , 9 June 2011

no edit summary

1,581

edits

Revision as of 19:16, 9 June 2011 (view source) Artag (talk \| contribs) No edit summary ← Older edit		Revision as of 19:17, 9 June 2011 (view source) Artag (talk \| contribs) No edit summary Newer edit →
Line 743:		Line 743:

	This is the main.hex generated by the use of the config files above.		This is the main.hex generated by the use of the config files above.

	It needs to be in arduino-0022/hardware/arduino/bootloaders/atmega/mega328p_16mhz_nanode.hex to match the config file above. This should allow programming via the arduino 'Program bootloader' mechanism, but I haven't tried it - I used avrdude directly.		It needs to be in arduino-0022/hardware/arduino/bootloaders/atmega/mega328p_16mhz_nanode.hex to match the config file above. This should allow programming via the arduino 'Program bootloader' mechanism, but I haven't tried it - I used avrdude directly.