Project:Nanode/Applications/Bootstrap config files: Difference between revisions
From London Hackspace Wiki
Project:Nanode/Applications/Bootstrap config files (view source)
Revision as of 22:11, 9 June 2011
, 9 June 2011→Notes & warnings
| Line 10: | Line 10: | ||
* Needs to be put into loader mode by grounding DIG7 and pushing the reset button | * Needs to be put into loader mode by grounding DIG7 and pushing the reset button | ||
* Will go straight from programming into running, but needs DIG7 ungrounding before the next reset | * Will go straight from programming into running, but needs DIG7 ungrounding before the next reset | ||
* OSX uses have noted that they have to hold the reset button down briefly when plugging the nanode into the usb port for it to be recognised. The timing of this can be quite tricky and it's best to run `tail -f /var/log/kernel.log` to confirm successful enumeration of the usb device. Once connected the nanode can be programmed again by using reset to start to bootloader again (with DIG7 still connected to ground). | |||
===Howto=== | ===Howto=== | ||
