Project:Nanode/Building a Nanode: Difference between revisions

Project:Nanode/Building a Nanode (view source)

298 bytes removed , 10 June 2011

552

edits

@@ Line 46: / Line 46: @@
 . Pay particular attention to the orientation of the 3V3 regulator - note it's NOT the same as the screen print legend. We had to change the regulator for one capable of more current and it came with a different pin-out. Follow the photographs carefully.
-We start with the resistors that make up the central strip.  Resistor leads should be bent close to the resistor body within about 1mm.
-A tip for doing this without tools -  Hold the resistor between thumb and first-finger, and use the other hand to bend the resistor lead over the thumb nail.
 ==Step 3==