Project:Nanode/Applications/Bootstrap config files: Difference between revisions

Project:Nanode/Applications/Bootstrap config files (view source)

1 byte added , 10 June 2011

Anonymous user

@@ Line 11: / Line 11: @@
 * Will go straight from programming into running, but needs DIG7 ungrounding before the next reset
-* OSX uses have noted that they have to hold the reset button down briefly when plugging the nanode into the usb port for it to be recognised. The timing of this can be quite tricky and it's best to run `tail -f /var/log/kernel.log` to confirm successful enumeration of the usb device. Once connected the nanode can be programmed again by using reset to start to bootloader again (with DIG7 still connected to ground).
+* OSX users have noted that they have to hold the reset button down briefly when plugging the nanode into the usb port for it to be recognised. The timing of this can be quite tricky and it's best to run `tail -f /var/log/kernel.log` to confirm successful enumeration of the usb device. Once connected the nanode can be programmed again by using reset to start to bootloader again (with DIG7 still connected to ground).
 ===Howto===