Project:Nanode/Building a Nanode: Difference between revisions
From London Hackspace Wiki
Project:Nanode/Building a Nanode (view source)
Revision as of 14:40, 30 August 2011
, 30 August 2011→Step 1
(→Step 1) |
(→Step 1) |
||
| Line 47: | Line 47: | ||
The following components are for the Vusb option - they should not be fitted in the basic kit: | The following components are for the Vusb option - they should not be fitted in the basic kit: | ||
2 x 68 ohm | 2 x 68 ohm resistor | ||
2 x 3V6 zener diodes | 2 x 3V6 zener diodes | ||
1 x 1M resistor | 1 x 1M resistor | ||
1 x 1K5 resistor | 1 x 1K5 resistor | ||
A 32 pin connector strip is supplied to help you connect you Nanode into a breadboard. | A 32 pin connector strip is supplied to help you connect you Nanode into a breadboard. | ||
