556
edits
Project:The Internet: Difference between revisions
From London Hackspace Wiki
→Components
No edit summary |
|||
| Line 26: | Line 26: | ||
Total = £7.31 | Total = £7.31 | ||
== Instructions (for Dummies) == | |||
# Drill 8.1mm hole in top of the ABS Box. | |||
# Remove Orange 5mm LED from bezel with the aid of heat gun. | |||
# Hot glue Red 5mm Flashing LED into bezel. | |||
# Attached bezel to ABS box. | |||
# Solder wires to contacts of CR2032 battery holder. | |||
# Hot glue CR2032 battery holder into lid of ABS Box. | |||
# Solder resistor to Red 5mm Flashing LED. | |||
# Solder wires of CR2032 battery holder to Red 5mm Flashing LED and resistor, ensuring the middle pin of the CR2032 battery holder is soldered to the short leg of the Red 5mm Flashing LED. | |||
== Alternative == | == Alternative == | ||
[http://www.instructables.com/id/How-to-make-The-Internet-from-The-IT-Crowd/ Instructables version] | [http://www.instructables.com/id/How-to-make-The-Internet-from-The-IT-Crowd/ Instructables version] | ||
