556
edits
Equipment/HPC LS3060 Laser Cutter: Difference between revisions
From London Hackspace Wiki
Equipment/HPC LS3060 Laser Cutter (view source)
Revision as of 18:58, 20 September 2012
, 20 September 2012→Positioning your material
| Line 132: | Line 132: | ||
* '''Caution:''' There are a number of electrically live areas inside the cabinet towards the back. Be very careful when reaching around at the back as you may get a shock. | * '''Caution:''' There are a number of electrically live areas inside the cabinet towards the back. Be very careful when reaching around at the back as you may get a shock. | ||
* Place the material on the cutter bed. | * Place the material on the cutter bed. | ||
* The bed height must be adjusted to the thickness of your material so as to ensure the focus point of the beam is in the optimal position for your task. The focus point of the beam is the point at the bottom edge of the ruler that is attached to the back of the cutting area. | * The bed height must be adjusted to the thickness of your material so as to ensure the focus point of the beam is in the optimal position for your task. The focus point of the beam is the point at the bottom edge of the ruler that is attached to the back of the cutting area. So: | ||
** For cutting materials <=8mm, the bed height should be aligned to the focus point, making the bottom of your material the focus point of the laser (i.e. the cutting bed should line up with the bottom of the ruler). | ** For cutting materials <=8mm, the bed height should be aligned to the focus point, making the bottom of your material the focus point of the laser (i.e. the cutting bed should line up with the bottom of the ruler). | ||
** For materials >8mm, the bed height needs to be adjusted such that the focus point is in the mid point of the material. | ** For materials >8mm, the bed height needs to be adjusted such that the focus point is in the mid point of the material. | ||
