146
edits
Power/works list: Difference between revisions
From London Hackspace Wiki
update
(strike) |
(update) |
||
| Line 7: | Line 7: | ||
** attach swa termination fittings to each of the holes on the top, ready to receive cables later | ** attach swa termination fittings to each of the holes on the top, ready to receive cables later | ||
** attach trunking to wall above new distro box | ** attach trunking to wall above new distro box | ||
* <s>Rewire 3ph connection from our main switch to splitters and then to existing fuse box and our new distro box</s> | |||
===Armoured cable works=== | ===Armoured cable works=== | ||
* The cable coming through to upstairs by the office became shortened while being cleated to the wall and needs to be replaced. | * The cable coming through to upstairs by the office became shortened while being cleated to the wall and needs to be replaced. | ||
** The cleats are not tight on the cable so it can be just eased through - it will be re-used downstairs | ** <s>The cleats are not tight on the cable so it can be just eased through - it will be re-used downstairs</s> | ||
** position the reel of 16/3 swa upstairs where the 'CU' is marked on the wall. Pull through cable via the cleats to downstairs and out to the new distro box | ** position the reel of 16/3 swa upstairs where the 'CU' is marked on the wall. Pull through cable via the cleats to downstairs and out to the new distro box | ||
** ensure cable long enough before cutting (use full-size hacksaw) | ** ensure cable long enough before cutting (use full-size hacksaw) | ||
