1,581
edits
Equipment/Vending machine: Difference between revisions
From London Hackspace Wiki
→To do
(→To do) |
(→To do) |
||
| Line 32: | Line 32: | ||
* Check motors still run | * Check motors still run | ||
**Motors currently connected to the original board. Needs testing with some suitable pin driving | |||
* Test position sensing again | * Test position sensing again | ||
** If the initial scheme (switch breaks motor circuit) doesn't easily work, simply rewire the switches for direct sensing. It isn't worth the hassle of the original scheme to save 8 wires. | |||
* Replace locks (it's hard to find locks of the right shape - some have been acquired, but need bending) | * Replace locks (it's hard to find locks of the right shape - some have been acquired, but need bending) | ||
**Side lock is 30mm. A new one is ordered. I have the cam I made for the old one. --[[User:Artag|Artag]] ([[User talk:Artag|talk]]) 16:35, 6 November 2013 (UTC) | |||
**What is the state of front locks ? We should still have the cams from the old ones | |||
* Set up first minimal operation | * Set up first minimal operation | ||
