217
edits
Equipment/Donkey Saw: Difference between revisions
From London Hackspace Wiki
no edit summary
(→Log: Corrected wrong update date) |
No edit summary |
||
| Line 91: | Line 91: | ||
* Floor levelling and machine needs bolting down. | * Floor levelling and machine needs bolting down. | ||
* Extra work rest needs fabricating to support longer work pieces. | * Extra work rest needs fabricating to support longer work pieces. | ||
== Maintenance == | |||
If the saw doesn't stop when its cut right through the cutting object. | |||
1. Undo the locking nut on the screw (I used an adjustable spanner - I think it's an Imperial size nut). | |||
2. WIth the saw running (but not cutting anything (i.e. FULLY DOWN - Don't worry - it won't harm the saw), slowly screw the screw in, until the saw stops. | |||
3. Turn the screw another 1/4 turn, and then (keeping the screwdriver in it, to prevent it moving) tighten the lock nut again. | |||
4. Test! If it doesn't work, repeat... | |||
