1,068
edits
Equipment/PCB etch station: Difference between revisions
From London Hackspace Wiki
Equipment/PCB etch station (view source)
Revision as of 15:03, 13 September 2014
, 13 September 2014no edit summary
No edit summary |
|||
| Line 92: | Line 92: | ||
If you use it, don't rely on the small bubbler to provide agitation - keep it moving the whole time (and be careful your board doesn't walk out the end of the basket when you do that). The small bubbler is really only there to re-aerate the solution after use, as it's quiet enough to leave on. | If you use it, don't rely on the small bubbler to provide agitation - keep it moving the whole time (and be careful your board doesn't walk out the end of the basket when you do that). The small bubbler is really only there to re-aerate the solution after use, as it's quiet enough to leave on. | ||
=== 3rd Tank - stripper === | === 3rd Tank - (water) stripper === | ||
Currently contains clean water (mainly to protect the heater if accidentally switched on | |||
Stripper can be resupplied with: | |||
* [http://www.megauk.com/strippers.php Mega Electronics 600-019] PC155 Resist Strip 1 Ltr makes 5 Ltrs | * [http://www.megauk.com/strippers.php Mega Electronics 600-019] PC155 Resist Strip 1 Ltr makes 5 Ltrs | ||
* [http://www.rapidonline.com/tools-equipment/etch-resist-stripper-75331 Rapid 34-0400] | * [http://www.rapidonline.com/tools-equipment/etch-resist-stripper-75331 Rapid 34-0400] | ||
