Equipment/Stratasys FDM 1650: Difference between revisions

Equipment/Stratasys FDM 1650 (view source)

238 bytes removed , 16 March 2015

67

edits

@@ Line 29: / Line 29: @@
 =Specification & documentation=
-As the Stratasys is undergoing extensive modification to it's control electronics, material use requirements and printheads, the factory specifications and original instructions for use are unlikely to remain accurate once refurbishment is complete. The previous specifications and instructions will likely be updated at that time.
-Broadly, the only things likely to remain the same is the large 11x11x11inch printing volume, the dual-head extruder setup, controlled printing enclosure, and high-resolution industrial mechanics.
+*Usable Print Area: 270mm x 270mm x 300mm
+*Top Print Speed: 20mm/sec (Yes its slow)
+*Print Tolerance: 0.05mm in X and Y axes. Z axis is dependent on layer thickness
+*Layer Thickness: 0.05mm to 0.2mm
+*Supported Materials: ABS and PLA plastic filaments
+*Usable Filament Sizes: standard 1.75mm