6
edits
Laser Cutter/Exporting DXF from Adobe Illustrator: Difference between revisions
From London Hackspace Wiki
Laser Cutter/Exporting DXF from Adobe Illustrator (view source)
Revision as of 08:13, 7 April 2015
, 7 April 2015Created page with "To get the exported .dxf file to import at the correct size into the laser cutter software, the "Artwork Scale" in the .dxf options must be set to "1 Inch = 1 Unit". To get t..."
(Created page with "To get the exported .dxf file to import at the correct size into the laser cutter software, the "Artwork Scale" in the .dxf options must be set to "1 Inch = 1 Unit". To get t...") |
(No difference)
|
