761
edits
Ultimakers-Induction: Difference between revisions
From London Hackspace Wiki
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| Line 7: | Line 7: | ||
The Ultimakers are setup nicely for PLA, and the manufacturer recommends PLA for beginners. So initially the plan is to only permit 3mm PLA. This is important as switching between filament material types complicates maintaining the printers and is a common source of nozzle blockage. | The Ultimakers are setup nicely for PLA, and the manufacturer recommends PLA for beginners. So initially the plan is to only permit 3mm PLA. This is important as switching between filament material types complicates maintaining the printers and is a common source of nozzle blockage. | ||
=== Reference Docs === | |||
There is some additional documentation linked to from the wiki page relating to the equipment; | There is some additional documentation linked to from the wiki page relating to the equipment; | ||
https://wiki.london.hackspace.org.uk/view/Equipment/Ultimakers | https://wiki.london.hackspace.org.uk/view/Equipment/Ultimakers | ||
=== Costs === | |||
There is eventually going to be a cost associated with using the Ultimakers, but thats TBA. | There is eventually going to be a cost associated with using the Ultimakers, but thats TBA. | ||
