240
edits
Archive:Equipment/Borg: Difference between revisions
From London Hackspace Wiki
→Steps to boot the cluster
(→Access) |
|||
| Line 40: | Line 40: | ||
* The lights on borg should be FLASHING green. A slow flash on the power buttons. DO NOT press any of these buttons. All the machines need to be brought up via the RAS | * The lights on borg should be FLASHING green. A slow flash on the power buttons. DO NOT press any of these buttons. All the machines need to be brought up via the RAS | ||
* With a webbrowser on your laptop, attached to the hackspace network, navigate to http://172.31.24.171 (I believe this is the right IP address :S) | * With a webbrowser on your laptop, attached to the hackspace network, navigate to http://172.31.24.171 (I believe this is the right IP address :S) | ||
* This is Borg5, the headnode - you should see a webpage asking for username and password. | * This is Borg5, the headnode - you should see a webpage asking for username and password. Username USERID password PASSW0RD (note the zero in password as oppose to the letter 'o') | ||
* Navigate to the last item on the left - RAS Partitions. | * Navigate to the last item on the left - RAS Partitions. | ||
* You should see the partition on the right as a block diagram. All the nodes should be connected and in Blue. Find a button marked something like "boot partition". Press it. | * You should see the partition on the right as a block diagram. All the nodes should be connected and in Blue. Find a button marked something like "boot partition". Press it. | ||
