Project:PCB Making: Difference between revisions
From London Hackspace Wiki
→Notes
(→Notes) |
|||
| Line 141: | Line 141: | ||
Artwork can be printed straight onto a transparency sheet, on a laser printer. Alternatively high street print shops will do the job. One run on the laser might not be dark enough, try printing multiple times on the same sheet to lay down more toner. | Artwork can be printed straight onto a transparency sheet, on a laser printer. Alternatively high street print shops will do the job. One run on the laser might not be dark enough, try printing multiple times on the same sheet to lay down more toner. | ||
The best medium for printing artwork on a laser is tracing paper as it has much better toner adhsion than transparency film and works fine with just one pass - it needs to be fairly thick, at least 90GSM to avoid crinkling in the fuser. A few years ago I wrote this extensive guide to making good PCBs : www.electricstuff.co.uk/pcbs.html | |||
The board was drilled on the Dremel Workstation. | The board was drilled on the Dremel Workstation. | ||
