901
edits
Laser Cutter/Instructions: Difference between revisions
From London Hackspace Wiki
→Cutting
Deanforbes (talk | contribs) |
Deanforbes (talk | contribs) |
||
| Line 92: | Line 92: | ||
* '''Caution:''' There are a number of electrically live areas inside the cabinet towards the back. Be very careful when reaching around at the back as you may get a shock. | * '''Caution:''' There are a number of electrically live areas inside the cabinet towards the back. Be very careful when reaching around at the back as you may get a shock. | ||
* Know where the CO2 extinguisher is and that you can easily get to it without having to come nearer to the cutter. | * Know where the CO2 extinguisher is and that you can easily get to it without having to come nearer to the cutter. | ||
* Monitoring progress | * Monitoring progress | ||
** | ** What to watch out for | ||
** What to do in case of problems | ** What to do in case of problems | ||
*** Note: There are at least 3 different ways of stopping the cutter mid-process. There is the emergency stop button on the cutter, there is the stop button in the software (not recommended), and there is a sensor that detects if the lid is opened. There is also a pause/resume button on the cutter. | *** Note: There are at least 3 different ways of stopping the cutter mid-process. There is the emergency stop button on the cutter, there is the stop button in the software (not recommended), and there is a sensor that detects if the lid is opened. There is also a pause/resume button on the cutter. | ||
