Equipment/Makerbot Cupcake/LogBook: Difference between revisions
From London Hackspace Wiki
Equipment/Makerbot Cupcake/LogBook (view source)
Revision as of 12:13, 27 November 2010
, 27 November 2010→Logbook
m (Reverted edits by Ytogohiga (Talk) to last revision by 93.97.176.250) |
|||
| Line 1: | Line 1: | ||
==Logbook== | ==Logbook== | ||
===25/11/2010 Operator: Glen=== | |||
Problems | |||
* The X and Y belt are too loose, this causes the print surface to move around randomly during printing. | |||
* We are out of PLA plastic and little black ABS remains. I placed an order for £300 of plastic two weeks ago from kd85 there's been no sign of it. I'll try to bring in more black PLA from home this weekend. | |||
Things to do | |||
* The no-tape sign should be replace as the blue painters paper tape can be used on the heated build surface. | |||
Things to stop doing | |||
* Stop adjusting the machine with a spirit-level. Move the print head to the center of the print bed then move the bed around to check if it's level. | |||
* Most of the compiler profiles shown to users generating gcode shouldn't be there and need to be removed from Skinforge. | |||
===15/10/2010 Operator: Billy=== | ===15/10/2010 Operator: Billy=== | ||
