Project:YAAC: Difference between revisions
From London Hackspace Wiki
→Burning hex code
| Line 180: | Line 180: | ||
Note, the device must be reset before proceeding with the 3 steps above. Also, AFAIK, you must be root to access the USB device. If you forget sudo, strange things might happen e.g. code not burning, device not erasing and starting, etc, though no error message will be given - it will fail silently. | Note, the device must be reset before proceeding with the 3 steps above. Also, AFAIK, you must be root to access the USB device. If you forget sudo, strange things might happen e.g. code not burning, device not erasing and starting, etc, though no error message will be given - it will fail silently. | ||
Investigate: http://www.pjrc.com/teensy/rawhid.html | Investigate adding UDEVs: http://www.pjrc.com/teensy/rawhid.html | ||
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="0480", MODE:="0666" | SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="0480", MODE:="0666" | ||
