Project:Sanguinololu Thermocouple

[[|Sanguinololu Thermocouple]]
Created	03/11/2012
Version	1
Members	Pinski1
Project Status	Awaiting PCBs
QR code

Introduction

I wanted to add a thermocouple to my 3D printer's hot end. Ideally it would improve the quality of my printed objects as it would provide more accurate temperature readings with greater immunity from electronic noise generated by the stepper motors.

Features

The PCB I have designed has the following features:

• Fits onto the expansion headers already present on the Sanguinololu
• Adds a MAX31855 thermocouple to digital convertor chip
• Enables temperature readings between -200°C to +1350°C ±2°C
• Has a resolution of 0.25°C
• Can sample at 10Hz

Files

Schematics

Eagle 5.11 file:

PCB Layout

Eagle 5.11 file:

Bill of Materials

Qty	Value	Ident	Description
1	TXB0104D	IC1	SOIC14 Bi-Directional level translator chip
1	TPS73033DBVT	IC2	Could be any SOT23-5 +3V3 voltage regulator
1	MAX31855K	IC3	SOIC8 Thermocouple-to-Digital chip
2	2.2uF	C1, C2	Ceramic 1206 decoupling capacitors
3	10nF	C3, C4, C5	Ceramic 0805 decoupling capacitors
1		SV1	2x5 way, straight, 2.54mm, female header
1		X1	2way, screw terminal, 5.08mm

Pictures

Top	Bottom
		The Eagle CAD layout.
		The Eagle CAD 3D render
		The PCB renders of OSH Park
To come	To come	The delivered PCBs.

How to Build

Tools required:

• soldering iron
• solder
• tweezers

Licence

This design is licensed under Creative Commons BY-NC-SA

This design is modified from Sanguinololu SD