Equipment/HP E3631A: Difference between revisions
From London Hackspace Wiki
mNo edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{EquipmentInfobox | |||
| name = HP Power Supply <!-- Name of the item. --> | |||
| image = HP_E3631A_PSU.jpg <!-- Image of the item. Leave with placeholder image if none exists. --> | |||
| model = E3631A <!-- Model --> | |||
| category = Equipment <!-- Main category. Please leave alone to keep item in this category --> | |||
| subcat = Test equipment<!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one --> | |||
| status = Good working order<!-- Set to one of; Good working order, Faulty, Out of order, Under construction, Out of consumables, Scrapped, or Unknown --> | |||
| consumables = <!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. --> | |||
| accessories = Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. --> | |||
| reqtraining = no<!-- Is training required to use this equipment? Yes or no. --> | |||
| trainlink = <!-- If training is required, provide a link to training signup or contact page. Otherwise leave blank. --> | |||
| acnode = no <!-- Is the equipment ACnode locked? --> | |||
| owner = <!-- Provide a link to owners members page if other than LHS --> | |||
| origin = Simon Klyne<!-- If via pledge, please link to the completed pledge page on the wiki --> | |||
| location = Ground Floor, Electronics area<!-- Floor, room/zone and location within that area --> | |||
| maintainers = <!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. --> | |||
| template_ver = 1.1 <!-- Please do not change. Used for tracking out-of-date templates --> | |||
}} | |||
The space now has a Hewlett Packard E3631A 80W Triple Output Power Supply, 6V, 5A & ±25V, 1A bench power supply which lives on the soldering bench. | The space now has a Hewlett Packard E3631A 80W Triple Output Power Supply, 6V, 5A & ±25V, 1A bench power supply which lives on the soldering bench. | ||
| Line 23: | Line 41: | ||
* Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV | * Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV | ||
* Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA | * Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA | ||
Latest revision as of 22:22, 29 May 2013
| HP Power Supply | |
|---|---|
 | |
| Model | E3631A |
| Sub-category | Test equipment |
| Status | Good working order |
| Accessories | Unknown |
| Training requirement | no |
| ACnode | no |
| Origin | Simon Klyne |
| Location | Ground Floor, Electronics area |
The space now has a Hewlett Packard E3631A 80W Triple Output Power Supply, 6V, 5A & ±25V, 1A bench power supply which lives on the soldering bench.
It's programmable over RS232 or GPIB/HPIB ports on the back and there is an extensive manual for it .
Key Features & Specifications
Output Ratings
- Output 1: 0 to 6 V, 0 to 5 A
- Output 2: 0 to +25 V, 0 to 1 A
- Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
- Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
- Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Ripple & Noise (20 Hz to 20 MHz)
- Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p
- Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms
- Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms
Readback Accuracy at 25°C ±5°C
- Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV
- Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
