Difference between revisions of "Equipment/HPC LS3060 Laser Cutter"

From London Hackspace Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
==Status==
 
==Status==
The laser cutter has yet to be [http://jonty.co.uk/bits/layzor/ unpacked].
+
The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME.
 +
 
 
==Model==
 
==Model==
 
* [http://hpclaser.co.uk/ HPC] LS3060 "plus" laser engraver and cutter.
 
* [http://hpclaser.co.uk/ HPC] LS3060 "plus" laser engraver and cutter.

Revision as of 10:10, 19 August 2010

Status

The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME.

Model

  • HPC LS3060 "plus" laser engraver and cutter.

Instructions

*** Please don't touch or fiddle with the laser cutter unless you've had permission from either Russ or Jonty. ***

Safety information

  • Never leave the laser cutter unattended - Your material may ignite, and an unchecked fire in the laser cutter could be both dangerous and costly.
  • Never cut PVC or chlorinated plastic - You should always know what material you are cutting, and chlorinated plastics should be avoided because they release chlorine gas when cut.
  • Do not try to cut metal in the laser cutter - If you wish to mark the metal, please use "Thermark Laser Engraving Spray / Paste".

Tips

Consumables