Difference between revisions of "Equipment/HPC LS3060 Laser Cutter"
Jump to navigation
Jump to search
(→Model) |
|||
Line 1: | Line 1: | ||
− | [[File:Laser | + | [[File:Laser-cut-key-rings.jpg|thumb|right]] |
==Status== | ==Status== | ||
The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME. | The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME. |
Revision as of 20:22, 19 August 2010
Status
The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME.
Model
- HPC LS3060 "plus" laser engraver and cutter.
- laser power 40W max
- 320 x 600mm honeycomb bed (cutting area possibly about 300 x 550mm)
- cutting speed ???
Instructions
*** Please don't touch or fiddle with the laser cutter unless you've had permission from either Russ or Jonty. ***
Safety information
- Never leave the laser cutter unattended - Your material may ignite, and an unchecked fire in the laser cutter could be both dangerous and costly.
- Never cut PVC or chlorinated plastic - You should always know what material you are cutting, and chlorinated plastics should be avoided because they release chlorine gas when cut.
- Do not try to cut metal in the laser cutter - If you wish to mark the metal, please use "Thermark Laser Engraving Spray / Paste".
Tips
- Some useful laser info from Adafruit - the settings section in particular gave a good idea of what we can expect.