Equipment/HPC LS3060 Laser Cutter/LogBook: Difference between revisions
From London Hackspace Wiki
Equipment/HPC LS3060 Laser Cutter/LogBook (view source)
Revision as of 10:53, 19 January 2011
, 19 January 2011→Logbook
No edit summary |
|||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
==Logbook== | ==Logbook== | ||
===19/1/2011 Note by MattVenn === | |||
Just to agree with Mark (below). I've spent about 4 hours over the last few days trying to get some settings that will cut 4mm laser ply. In the past, I have managed it in one cut! Now I can't do it with 8 passes! | |||
===19/1/2011 Note by [[User:Ms7821|Mark]]=== | ===19/1/2011 Note by [[User:Ms7821|Mark]]=== | ||
* The laser cutter <b>will not cut</b> 4mm ply. It won't even scorch the bottom of the wood after 4 passes at speed 3 (and it's hard to tell whether it's cut or not without moving the target). I assume Z axis fiddling is required, but until a decent process is worked out, I've written a warning on the speed chart. | * The laser cutter <b>will not cut</b> 4mm ply. It won't even scorch the bottom of the wood after 4 passes at speed 3 (and it's hard to tell whether it's cut or not without moving the target). I assume Z axis fiddling is required, but until a decent process is worked out, I've written a warning on the speed chart. | ||
