Difference between revisions of "Fasteners"
(→What) |
m (→What) |
||
(15 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
+ | {{Infobox tool | ||
+ | | name = Fastener stock | ||
+ | | type = Consumable | ||
+ | | status = Operational | ||
+ | | origin = Operating expenses | ||
+ | | location = Back of tool board, near pillar drill | ||
+ | | maintainers = [[User:Artag|Artag]] | ||
+ | }} | ||
+ | |||
==Where== | ==Where== | ||
A set of mini-drawers in the workshop (on the shelves near the pillar drill) [picture needed] | A set of mini-drawers in the workshop (on the shelves near the pillar drill) [picture needed] | ||
+ | There is also box on the member's shelves with some spare stock. If you replenish the drawers from there, please note it in the table below. | ||
==What== | ==What== | ||
Line 10: | Line 20: | ||
Restocked 14th November 2012 from [http://www.challenge-indfast.co.uk Challenge (Europe) Ltd] | Restocked 14th November 2012 from [http://www.challenge-indfast.co.uk Challenge (Europe) Ltd] | ||
− | (note : | + | (note : drawers need labelling) |
{|border="1" cellpadding="5" cellspacing="0" | {|border="1" cellpadding="5" cellspacing="0" | ||
− | |- | + | |- |
! Size !! Description !! Length mm !! Quantity !! Cost per 100 (ex vat) !! Cost || Stocks low ? | ! Size !! Description !! Length mm !! Quantity !! Cost per 100 (ex vat) !! Cost || Stocks low ? | ||
− | |- | + | |- style="background-color:#eeffff;" |
|M3|| hex full nut || - || 1000 || £0.12 || £1.44 || | |M3|| hex full nut || - || 1000 || £0.12 || £1.44 || | ||
− | |- | + | |-style="background-color:#eeffff;" |
− | |M3|| flat washer || - || 1000 || £0.105 || £1.26 || | + | |M3|| flat washer || - || 1000 || £0.105 || £1.26 || YES |
− | |- | + | |-style="background-color:#eeffff;" |
− | |M3|| capscrew || 10 || 200 || £1.36 || £3.27 || | + | |M3|| capscrew || 10 || 200 || £1.36 || £3.27 || YES (NONE!) |
− | |- | + | |-style="background-color:#eeffff;" |
|M3|| pan head pozi || 6 || 500 || £0.24 || £1.44 || | |M3|| pan head pozi || 6 || 500 || £0.24 || £1.44 || | ||
− | |- | + | |-style="background-color:#eeffff;" |
|M3|| pan head pozi || 10 || 500 || £0.336 || £2.02|| | |M3|| pan head pozi || 10 || 500 || £0.336 || £2.02|| | ||
− | |- | + | |-style="background-color:#eeffff;" |
|M3|| pan head pozi || 20 || 500 || £0.43 || £2.28|| | |M3|| pan head pozi || 20 || 500 || £0.43 || £2.28|| | ||
− | |- | + | |-style="background-color:#eeffff;" |
|M3|| pan head pozi || 40 || 500 || 0.95 || £5.70|| | |M3|| pan head pozi || 40 || 500 || 0.95 || £5.70|| | ||
− | |-style="background-color:# | + | |-style="background-color:#ffffee;" |
|M4|| hex full nut || - || 1000 || £0.21 || £2.52 || | |M4|| hex full nut || - || 1000 || £0.21 || £2.52 || | ||
− | |-style="background-color:# | + | |-style="background-color:#ffffee;" |
|M4|| flat washer || - || 1000 || £0.193 || £2.32 || | |M4|| flat washer || - || 1000 || £0.193 || £2.32 || | ||
− | |-style="background-color:# | + | |-style="background-color:#ffffee;" |
|M4|| capscrew || 16 || 500 || £1.36 || £8.16|| | |M4|| capscrew || 16 || 500 || £1.36 || £8.16|| | ||
− | |-style="background-color:# | + | |-style="background-color:#ffffee;" |
|M4|| pan head pozi || 10 || 500 || £0.56 || £3.36|| | |M4|| pan head pozi || 10 || 500 || £0.56 || £3.36|| | ||
− | |-style="background-color:# | + | |-style="background-color:#ffffee;" |
|M4|| pan head pozi || 20 || 500 || £0.896 || £5.38|| | |M4|| pan head pozi || 20 || 500 || £0.896 || £5.38|| | ||
− | |-style="background-color:# | + | |-style="background-color:#ffffee;" |
|M4|| pan head pozi || 40 || 500 || £1.748 || £10.49|| | |M4|| pan head pozi || 40 || 500 || £1.748 || £10.49|| | ||
− | |- | + | |-style="background-color:#eeffff;" |
|M6|| hex full nut || - || 250 || £0.456 || £1.37|| | |M6|| hex full nut || - || 250 || £0.456 || £1.37|| | ||
− | |- | + | |-style="background-color:#eeffff;" |
|M6|| flat washer || - || 250 || £0.384 || £1.15|| | |M6|| flat washer || - || 250 || £0.384 || £1.15|| | ||
− | |- | + | |-style="background-color:#eeffff;" |
|M6|| hex head setscrew || 20 || 250 || £0.276 || £0.83|| | |M6|| hex head setscrew || 20 || 250 || £0.276 || £0.83|| | ||
|} | |} | ||
Line 63: | Line 73: | ||
If you are a member, these may be used for your personal project. Please be excellent and respect other members : if you use more than a few, make a donation to help pay for your usage and email the [[Maintenance/Adopt-a-Spanner|keeper]] to ensure supplies are replaced. | If you are a member, these may be used for your personal project. Please be excellent and respect other members : if you use more than a few, make a donation to help pay for your usage and email the [[Maintenance/Adopt-a-Spanner|keeper]] to ensure supplies are replaced. | ||
+ | |||
+ | |||
+ | Pleas keep the drawers tidy. If you drop them, put them back correctly. If you take more than you need, return the excess to the correct drawer. | ||
We can't hold every possible size but the initial stock is just to get things started. It may be possible to stock additional items. If you think there is a need to extend the range please note it here or in email. Be sensible or you'll be ignored. | We can't hold every possible size but the initial stock is just to get things started. It may be possible to stock additional items. If you think there is a need to extend the range please note it here or in email. Be sensible or you'll be ignored. | ||
Line 73: | Line 86: | ||
|M3|| capscrew || 20 | |M3|| capscrew || 20 | ||
|- | |- | ||
− | |M4|| capscrew || | + | |M4|| capscrew || 10 |
+ | |- | ||
+ | |M4|| capscrew || 40 | ||
+ | |- | ||
+ | |M6|| capscrew || 10 | ||
+ | |- | ||
+ | |M6|| capscrew || 20 | ||
+ | |- | ||
+ | |M6|| capscrew || 50 | ||
+ | |- | ||
+ | |M8|| capscrew || ?? | ||
|} | |} | ||
− | + | Specialist - these should perhaps be bought personally rather than as general stock, but are noted here to help gauge interest. Long metric screws are not exotic but if they're very long compared with thickness they tend to be expensive .. e.g. 10 x the cost of a short screw. And it's often the case that a thicker screw is appropriate for longer lengths. | |
+ | |||
+ | {|border="1" cellpadding="5" cellspacing="0" | ||
+ | |- | ||
+ | ! Size !! Description !! Length mm | ||
+ | |- | ||
+ | |M3|| capscrew || 40 | ||
+ | |- | ||
+ | |M3|| capscrew || 60 | ||
+ | |- | ||
+ | |M4|| capscrew || 60 | ||
+ | |- | ||
+ | |UNC 1/4-20|| capscrew || 1" | ||
+ | |- | ||
+ | |UNC 1/4-20|| capscrew || 2" | ||
+ | |- | ||
+ | |UNC 3/8-16|| capscrew || 1" | ||
+ | |- | ||
+ | |UNC 3/8-16|| capscrew || 2" | ||
+ | |- | ||
+ | |} | ||
==Who== | ==Who== | ||
In case of problems, suggestions or other queries contact [[User:Artag|Artag]] | In case of problems, suggestions or other queries contact [[User:Artag|Artag]] | ||
+ | |||
+ | ==Suggestions== | ||
+ | |||
+ | *Large range of Woodscrews | ||
+ | *Larger range of nuts, bolts and washers | ||
+ | *Rivets and rivet gun | ||
+ | *Organised in pots in a rolling cabinet | ||
+ | |||
+ | for example: | ||
+ | *[http://www.garagejournal.com/forum/showpost.php?p=1909329&postcount=17 Drawer of nuts and bolts] | ||
+ | *[http://www.screwfix.com/p/turbogold-woodscrews-trade-pack-1400-pieces/40237 Set of assorted wood screws] | ||
+ | [[Category:Consumables]] |
Latest revision as of 21:11, 20 February 2014
Type | Consumable |
---|---|
Status | Operational |
Origin | Operating expenses |
Location | Back of tool board, near pillar drill |
Maintainers | Artag |
Where
A set of mini-drawers in the workshop (on the shelves near the pillar drill) [picture needed]
There is also box on the member's shelves with some spare stock. If you replenish the drawers from there, please note it in the table below.
What
Various sizes of metric nuts, screws, washers, capscrews, setscrews.
Restocked 14th November 2012 from Challenge (Europe) Ltd
(note : drawers need labelling)
Size | Description | Length mm | Quantity | Cost per 100 (ex vat) | Cost | Stocks low ? |
---|---|---|---|---|---|---|
M3 | hex full nut | - | 1000 | £0.12 | £1.44 | |
M3 | flat washer | - | 1000 | £0.105 | £1.26 | YES |
M3 | capscrew | 10 | 200 | £1.36 | £3.27 | YES (NONE!) |
M3 | pan head pozi | 6 | 500 | £0.24 | £1.44 | |
M3 | pan head pozi | 10 | 500 | £0.336 | £2.02 | |
M3 | pan head pozi | 20 | 500 | £0.43 | £2.28 | |
M3 | pan head pozi | 40 | 500 | 0.95 | £5.70 | |
M4 | hex full nut | - | 1000 | £0.21 | £2.52 | |
M4 | flat washer | - | 1000 | £0.193 | £2.32 | |
M4 | capscrew | 16 | 500 | £1.36 | £8.16 | |
M4 | pan head pozi | 10 | 500 | £0.56 | £3.36 | |
M4 | pan head pozi | 20 | 500 | £0.896 | £5.38 | |
M4 | pan head pozi | 40 | 500 | £1.748 | £10.49 | |
M6 | hex full nut | - | 250 | £0.456 | £1.37 | |
M6 | flat washer | - | 250 | £0.384 | £1.15 | |
M6 | hex head setscrew | 20 | 250 | £0.276 | £0.83 |
Fasteners are often misnamed. Asking for the wrong thing will result in disappointment or, in some shops, ridicule.
- A setscrew is threaded all the way to the end and usually has a hexagonal head. It is often wrongly called a bolt.
- A bolt has a smooth portion as well as a threaded portion
- Pozidrive and Philips are both known as cross-head screws and use a '+' shaped screwdriver tip
- Pozidrive are more common and have short radial lines between the main grooves
- A single slot right across the head for use with a common flat-blade screwdriver is called a slotted head
- A full rounded screw top is called a round head
- A shallow round head is called a pan head
- A cylindrical head with an allen / hex key hole is called a cap head screw, cap screw or socket head screw
- A conical head intended to lie flush with the surface is called a countersunk head
How
If you are a member, these may be used for your personal project. Please be excellent and respect other members : if you use more than a few, make a donation to help pay for your usage and email the keeper to ensure supplies are replaced.
Pleas keep the drawers tidy. If you drop them, put them back correctly. If you take more than you need, return the excess to the correct drawer.
We can't hold every possible size but the initial stock is just to get things started. It may be possible to stock additional items. If you think there is a need to extend the range please note it here or in email. Be sensible or you'll be ignored.
Size | Description | Length mm |
---|---|---|
M3 | capscrew | 20 |
M4 | capscrew | 10 |
M4 | capscrew | 40 |
M6 | capscrew | 10 |
M6 | capscrew | 20 |
M6 | capscrew | 50 |
M8 | capscrew | ?? |
Specialist - these should perhaps be bought personally rather than as general stock, but are noted here to help gauge interest. Long metric screws are not exotic but if they're very long compared with thickness they tend to be expensive .. e.g. 10 x the cost of a short screw. And it's often the case that a thicker screw is appropriate for longer lengths.
Size | Description | Length mm |
---|---|---|
M3 | capscrew | 40 |
M3 | capscrew | 60 |
M4 | capscrew | 60 |
UNC 1/4-20 | capscrew | 1" |
UNC 1/4-20 | capscrew | 2" |
UNC 3/8-16 | capscrew | 1" |
UNC 3/8-16 | capscrew | 2" |
Who
In case of problems, suggestions or other queries contact Artag
Suggestions
- Large range of Woodscrews
- Larger range of nuts, bolts and washers
- Rivets and rivet gun
- Organised in pots in a rolling cabinet
for example: