Nanode experiences: Difference between revisions
From London Hackspace Wiki
(Created page with "=Bootloader= Once you have built your Nanode you will need to flash a bootloader. This is the standard Arduino bootloader, but modified to use a different pin (6) for the on-boa...") |
|||
| Line 2: | Line 2: | ||
Once you have built your Nanode you will need to flash a bootloader. This is the standard Arduino bootloader, but modified to use a different pin (6) for the on-board LED instead of the standard pin 13. | Once you have built your Nanode you will need to flash a bootloader. This is the standard Arduino bootloader, but modified to use a different pin (6) for the on-board LED instead of the standard pin 13. | ||
[http://www.thingiverse.com/thing:7497 about]<br> | |||
[http://www.thingiverse.com/download:31058 code] | |||
=Pachube= | =Pachube= | ||
Revision as of 23:03, 5 July 2011
Bootloader
Once you have built your Nanode you will need to flash a bootloader. This is the standard Arduino bootloader, but modified to use a different pin (6) for the on-board LED instead of the standard pin 13.
Pachube
Pachube acts as a respository of datastreams collected by sensors. You can then graph the resulting data or access the stream to control something based on the data.
Email edborden at pachube dot com to ask for your pachube account to be upgraded
