SwapShop: Difference between revisions
From London Hackspace Wiki
(→Free) |
(→Free) |
||
| Line 73: | Line 73: | ||
* Lots of pneumatic gear - 3x 50mm bore 300mm stroke 10 bar cylinders, lots of smaller cylinders, solenoid 3-port valves, 2 carbon dioxide fire extinguishers, 10 bar regulator, 11 bar and 68 bar relief valves, 2l 16 bar buffer tank. None certified/tested, used at collector's risk! | * Lots of pneumatic gear - 3x 50mm bore 300mm stroke 10 bar cylinders, lots of smaller cylinders, solenoid 3-port valves, 2 carbon dioxide fire extinguishers, 10 bar regulator, 11 bar and 68 bar relief valves, 2l 16 bar buffer tank. None certified/tested, used at collector's risk! | ||
* 2 channel 40MHz radio control transmitter, receivers and servos | * 2 channel 40MHz radio control transmitter, receivers and servos | ||
=== Wants === | === Wants === | ||
* Revolution counter, the small kind you find in tape recorders. | * Revolution counter, the small kind you find in tape recorders. | ||
* Model steam engine, Mamod or similar | * Model steam engine, Mamod or similar | ||
Revision as of 08:54, 8 September 2010
If you have anything you no longer want, list it here, either for free, swap or sale. You can also list the things you want.
Aden
Sale or Swap
- DVB-C to firewire thingy
- DVB-S card
Free
- A couple of tivos (claimed by glen)
Jonty
Sale or swap
- 2x PCI DVB-T cards
Free
- A Dyson DC-16 handheld vacuum, with a knackered battery and no charger. Or tools.
Wants
- High-res webcams, preferably > 30fps (PS2 / PS3 cam would be great)
- Lasers, of any type
- A working DVD player (Offers from Dom and Muz recieved)
- A crappy electric drill, at least 18V
JamesHarrison
Sale or Swap
- Misc servers, no disks, Celeron/P4-era, dodgy cases, not proper server-grade things
- 48U Dell full-depth rack, casters, a bit scruffy and a bust lock on side panel (no keys for the front panel lock) but otherwise decent condition, collection only
Wants
- Fibre networking gear (FC HBAs, NICs, switches, disk arrays)
- Storage equipment - old NAS boxes, tape drives, etc (nothing under 100Gb unless it's something like a 73GB/10kRPM FC/SCSI disk)
- RC/flight gear (transmitters, receivers, motors, props, ESCs)
- Hot air rework/temperature controlled soldering iron
Artag
Free
- C/Port and C/Dock for Dell C600 etc. laptops
- Digital BC17F-10 cable for RL01/02
Sale or swap
- 3 Motorola XTN446 radios with drop-in chargers. As new.
- Datron 1051 DVM and 1220 scanner (IEEE-488)
- Small environmental chamber (heat, cold, but not humidity) ~50l capacity
Wants
- Broken Eee PC for spares, or just an Eee PC 4G (701) keyboard.
- Electronics testgear, working or not
- Old calculators, especially hewlett packard
- A job (but not too soon)
Loan
Various stuff that I could bring to the space by arrangement, for temporary use (some of these are heavy and most would require a car trip so not trivial):
- Testgear - signal generators, DVMs, counters, oscilloscopes, logic analysers, spectrum analysers, LCR measurement, PSUs, current probes etc. Ask if you're looking for something.
- Mechanical - sheet folder, toggle press, die filer, linisher, power hacksaw, grinding vice, scrollsaws, MIG welder, PCB tank, forge/brazing hearth, bar cropper.
Joe/ascenseur
Free
- Motic Manual Microscope (mirror light source)
- A CD Drive
Sale or Swap
- Wasp CCD Barcode Scanner (PS/2)
Wants/Would-Likes
- IDE DVD Drive
Jim/srimech
Free
- Lots of pneumatic gear - 3x 50mm bore 300mm stroke 10 bar cylinders, lots of smaller cylinders, solenoid 3-port valves, 2 carbon dioxide fire extinguishers, 10 bar regulator, 11 bar and 68 bar relief valves, 2l 16 bar buffer tank. None certified/tested, used at collector's risk!
- 2 channel 40MHz radio control transmitter, receivers and servos
Wants
- Revolution counter, the small kind you find in tape recorders.
- Model steam engine, Mamod or similar
