Difference between revisions of "3D Printing"

From London Hackspace Wiki
Jump to navigation Jump to search
Line 17: Line 17:
  
 
Current trainer/maintainers are: cptPrime (Timour)
 
Current trainer/maintainers are: cptPrime (Timour)
 +
 +
Training Wiki page: https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training
  
 
= Logging =
 
= Logging =
 
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1
 
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1

Revision as of 21:58, 24 May 2016

We have 2x 3D printers:

Equipment

Hull

Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.

Crump

Crump is a Lulzbot Mini Flexystuder.
Accessible via http://crump from inside the hackspace network.

Cost

Using the printers costs £1.50/hour of printing + 20p/meter of filament. Octoprint gives you both of these.

Training

Training is required. There is a cost of £5 to be trained, payable to the trainer.

Current trainer/maintainers are: cptPrime (Timour)

Training Wiki page: https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training

Logging

All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1