Difference between revisions of "3D Printing"

From London Hackspace Wiki
Jump to navigation Jump to search
Line 5: Line 5:
 
[[Hull]] is a Lulzbot Mini Standard. <br />
 
[[Hull]] is a Lulzbot Mini Standard. <br />
 
Accessible via http://hull from inside the hackspace network.
 
Accessible via http://hull from inside the hackspace network.
 +
==== Filament ====
 +
Hull will print the follow filament:
 +
* PLA
 +
* ABS
 +
* XT
 +
* Nylon
 +
  
 
=== Crump ===
 
=== Crump ===
 
[[Crump]] is a Lulzbot Mini Flexystuder. <br />
 
[[Crump]] is a Lulzbot Mini Flexystuder. <br />
 
Accessible via http://crump from inside the hackspace network.
 
Accessible via http://crump from inside the hackspace network.
 +
==== Filament ====
 +
Crump will print the follow filament:
 +
* Ninjaflex
  
 
= Cost =  
 
= Cost =  

Revision as of 22:01, 24 May 2016

We have 2x 3D printers:

Equipment

Hull

Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.

Filament

Hull will print the follow filament:

  • PLA
  • ABS
  • XT
  • Nylon


Crump

Crump is a Lulzbot Mini Flexystuder.
Accessible via http://crump from inside the hackspace network.

Filament

Crump will print the follow filament:

  • Ninjaflex

Cost

Using the printers costs £1.50/hour of printing + 20p/meter of filament. Octoprint gives you both of these.

Training

Training is required. There is a cost of £5 to be trained, payable to the trainer.

Current trainer/maintainers are: cptPrime (Timour)

Training Wiki page: https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training

Logging

All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1