3D Printing: Difference between revisions
From London Hackspace Wiki
(→Cost) |
|||
| Line 21: | Line 21: | ||
= Cost = | = Cost = | ||
Using the printers costs £1.50/hour of printing + | Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these. | ||
= Training = | = Training = | ||
Revision as of 19:36, 2 June 2016
We have 2x 3D printers:
Equipment
Hull
Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.
Filament
Hull will print the follow filament:
- PLA
- ABS
- XT
- Nylon
Crump
Crump is a Lulzbot Mini Flexystuder.
Accessible via http://crump from inside the hackspace network.
Filament
Crump will print the follow filament:
- Ninjaflex
Cost
Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.
Training
Training is required. There is a cost of £5 to be trained, payable to the trainer.
Current trainer/maintainers are: cptPrime (Timour)
Training Wiki page: https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training
Logging
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1
