Project:RELaserSoftware

Reverse Engineering Laser Software

The laser software by Leetro is bad, we need to know about the .mol file that is created by it so we can create our own in some fashion. Also if it does anything fancy when it downloads itself via USB.

Background

The software is available here. Please scan this with antivirus software before use.

There is a special patched version that cannot currently (but hopefully one day) will be useful for exploring .mol files on babbage in EB4890's folder.

• Manual for the MPC6515 controller (uses Modbus over serial for the control panel)

Note that this says there's software bounds protection with firmware versions 4.1.0.0 or above (once origin is set)

• Firmware for MPC6515 controller (and LaserCut software again)

the firmware is in the "And tools update" .rar file

the above, translated by google

• A commercial printer driver compatible with the MPC6515

Has comments on the .ini file settings

• Documentation for the MPC03 (previous version, we're MPC05) with .ini file info
• DSP chip and compiler. See also, GDB toolchain. These chips are end-of-line, but were supported by GCC up to 4.2.

Current State of work

• We have some knowledge of the .MOL format
• We have a .TXT to .MOL compiler based on a dll. (Windows or Wine only)
• We have a .TXT parser/generator using python and construct

Currently to do

• Figure out DXFs - A python to dxf to pdf converter might be useful. It seems to have got swallowed by by gaping maw of broken links. I've not found a stand alone parser.
• Figure out which parts of the TXT file correspond to which function calls, so we know how to generate meaningful TXT files.
• More work on .Mol files?

Current Repo

Current Repo of work done by user:JasperWallace

Initial Analysis of .mol file

Looking at: /Solexious/MarioBoxes/MINIMARIO.MOL

No ASCII strings (looking using strings)

Does not appear to be compressed (too many zeroes)

0x000	Header
0x200	One set of information What?
0x400	Another set of information.
0xa10	Likely co-ordinate data. Quite repetitive. Analysis document was mario boxes, with many repetitions of sub boxes, so that makes sense. It looks like possible 16bit number co-oords as the numbers range from a few thousands to hundreds. 32bits are in unrealistic ranges (huge in negative ranges).

Projects/RELaserSoftware/Compilation traces

USB

Vendor: 0548 Product: 1005

The protocol seems to be fairly simple. I have a capture of some file downloads and deleting a file.

looks like:

commands are sent to endpoint 0x04 and read form 0x88, sent commands are (byte)length and then length bytes

commands 5 and 6 seem to be start and end

example command block:

>w04 0002     00000000: 01 05
*r88 0001     00000000: 04
>w04 0006     00000000: 05 01 01 83 01 7a
*r88 0001     00000000: 06
*r88 0001     00000000: 05
>w04 0002     00000000: 01 04
*r88 0014     00000000: 0f 01 83 53 51 55 41 52 45 20 20 4d 4f 4c 00 0e
    00000010: 00 00 00 66
>w04 0002     00000000: 01 06

That last reply packet includes the ascii for 'SQUARE MOL' with two spaces in the middle to pad it to 11 characters. This must be a file name in DOS 8.3 format with the . implied between the 8th and 9th characters.

This presumably maps directly to a FAT16 entry, so don't let it be null or begin with a dot!

It isn't, the protocol dosn't seem to be doing any block level management at all, looks like the controller is nice enough to do that for us JasperWallace 01:11, 28 November 2010 (UTC)

State Dump

Now all in this mercurial repo:

http://pointless.net/hg/

Random Links that may be useful

• http://www.solustan.com/linkmotion_and_leetro.php
• http://www.rabbitlaserusa.com/DriverDisk/MPC03/MPC03LV3030/MPC03-LV%203.0.3.0/
• http://www.rabbitlaserusa.com/0/

Driver

Works for VID 0548, PID 1005. Description of the device is EZ-USB (68013A), which is basically a serial interface.