Project:Sanguinololu Thermocouple: Difference between revisions
From London Hackspace Wiki
No edit summary |
|||
Line 36: | Line 36: | ||
<!-- some step by step, illustrated, instructions--> | <!-- some step by step, illustrated, instructions--> | ||
== Licence == | == Licence == | ||
This design is licensed under [http://creativecommons.org/licenses/by-nc-sa/3.0/ CC BY-NC-SA] |
Revision as of 18:52, 7 November 2012
Introduction
I wanted to add a thermocouple to my 3D printer's hot end. Ideally it would improve the quality of my printed objects as it would provide more accurate temperature readings with greater immunity from electronic noise generated by the stepper motors.
Features
The PCB I have designed has the following features:
- Fits onto the expansion headers already present on the Sanguinololu
- Adds a MAX31855 temperature sensing chip
- Enables temperature readings between -750degC and +1350degC +-2degC
- Has a resolution of 0.25degC
Files
Schematics
Eagle 5.11 file:
PCB Layout
Eagle 5.11 file:
BoM
- MAX31855K
- TXB0104D
- TPS73033DBVT (any SOT-23-5 +3V3 voltage regulator)
- 10nF 0805
- 2.2uF 1206
- 2x5 way female socket
Pictures
How to Build
Licence
This design is licensed under CC BY-NC-SA