Hackspace Move/Cremer Restoration

This is a list of things that need to be fixed or restored once we leave Cremer st. Please add anything you can think of, they will be struck off once we have confirmation that the work doesn't need to be done, or is completed.

I see a red door and I want to paint it black...

We need a door for the loo. The red door that was rescued from junking is now in the workshop, between the member box shelves and the machine tools, up against the wall. The holes have been patched and it's sanded. It needs to be painted, first with grey undercoat, and let to dry, second with black gloss. This will take a while because you can only paint one side at a time. I recommend using two sawhorses, and probably take it outside if it's nice out.

Paints for this are in one of the two bags stored on the last row of member box shelves in bags marked "for cremer restoration / do not use". There should be a clean brush soaking in the water in the shower room.

Things to keep in mind:

• Clean off the brushes and close the paint tins after each coat and when finished! This paint should be quite easy to take off.
• If you don't finish, update here with the time of the last coat so somebody else can pick up where you took off.
• Don't forget the edges of the door!

Volunteer

Specialist:

chauffeur	member x	to help transport tools and building materials on saturday (morning is ideal, but later is ok too)
doorbot fixer	member x	to re-enable doorbot at cremer street so people can get in and out.

General labour:

• aaron - all weekend 20-21
• ...

Supplies

The various supplies that have been bought and stored at the hackspace are on the last row of member box shelves in plastic bags with labels on them.

Supplies needed this weekend

Cleaning
buckets	from hackspace	3
rags	from hackspace	infinity
henry	already at cremer	1
paint scraper	from hackspace	1
power sander + sandpaper	from hackspace	1
bins for transporting tools	from hackspace	3
Fixing holes in walls
screwdrivers	from hackspace	2 posidriv, 1 phillips, 1 slotted
grippers	from hackspace	3
putty knives	from hackspace	3
pollyfilla	bought	1 bucket (may need more)
work gloves	from hackspace	3 pairs
Painting
brushes	from hackspace, if clean / to buy	3 total
roller frames	from hackspace	2
rollers	to buy	2
trays	to buy	1
coveralls	from hackspace	as many as we can borrow
white emulsion paint	from space	2 huge buckets, to start
grey undercoat	bought	1 litre
black gloss	bought	1 litre
mineral spirits	from hackspace / to buy	1 jug (litre?)
rubber gloves	from hackspace / to buy	2 pairs
Rebuilding loo door
door itself	at hackspace	stored in workshop against wall between member boxes and machine tools.
Wood	to buy	?
Pane of frosted glass	to buy	?
Drill	already at cremer	1
forstner bit set	from hackspace	1
wood screws	from hackspace	various sizes
tape measure	from hackspace	1
1/2" or 3/4" chisel	from hackspace	1
level	from hackspace	1
wood saw	from hackspace	1
sawhorses	from hackspace	2
hammer drill	from hackspace	1
masonry drill set	from hackspace	1
masonry screws	from hackspace / to buy	a bunch
wood plane	from hackspace	1
Reinstalling loo window
pane of Georgian wired glass	to buy	NxM
glass sealant	bought	1 canister
sandpaper	from hackspace	various
caulking gun	from hackspace	1
Masonry (if we do it ourselves)
high-density breeze blocks	to buy	??
shovel	??	1
sheet of wood (for mortar)	from space	1
bricklaying trowel	to buy	1
cold chisel	from space	1
lump hammer	from space	1
brick jointer	to buy	??
cement	to buy	??
aggregate	to buy	??
Fixing holes in front door
wall filler	bought	1 small tin
???
Removing Kitchen
???
Plumbing
adjustable spanner	from hackspace	1
???
Fixing holes in front door
scrap wood	from space	several pieces
wood saw	from space	1
drill	already at cremer	1
wood drill set	from hackspace	1
screwdriver bit	from hackspace	assortment
wood screws	from hackspace	various
Misc
hammer	from space	1
scrap lumber	from space	several pieces

Saturday Checklist

• Get items from old space (including door!) and bring to Cremer so people can start.
• Pick up new supplies and bring to Cremer
• Clean walls
• Clean sinks
• Repair holes in walls
• lunch

• Removing doorbot and repairing holes in door comes last. (next weekend, probably)

Toilets

• Paint all walls white in toilets.
• Paint toilet doors black.
• biolab/darkroom - Remove shelving/work surface, restore partition (and door ?), and replace loo and basin that have been removed and stored.

Unit 24

• Repair holes in front door/remove camera from spy hole and outside door.
• Restore connecting wall to 23.
• Replace kitchen sink in original location, which was under the laptop bar: on the right as you walk into the main room of 24.
• Remove everything else in kitchen.
• Remove waste pipe to 23.
• Wash concrete block walls, fill holes, and paint where necessary.
• Collect decorative electrical panels - one by front door, possibly one by kitchen door.

Unit 23

• Fit new glass where extraction for lasercutter is currently.
• Fill in hole where the duct comes through the wall from the workshop.
• Wash concrete block walls, fill holes, and paint where necessary.

Outside

• Sweep balconies for any items.

Measurements

• Size of breeze blocks: 440 x 215 x 100mm
• inter-unit doorway approx size: 1170 x 2240mm
• new door to be installed in loo: 686 x 1981mm
• height of ceiling in loo -- to be measured (may be uneven)
• approx area to brick up in loo: 1000 x 2700mm
• door frame timber: 50x100mm
• external loo window to fix: 854mm x 232 mm -- someone should double-check before ordering