Equipment/LatheMillCombo: Difference between revisions
(added maintainer) |
No edit summary |
||
| Line 19: | Line 19: | ||
{{cleanup|reason=Cleanup per [[Wiki todo]]|date=April 2013}} | {{cleanup|reason=Cleanup per [[Wiki todo]]|date=April 2013}} | ||
'''<div style="color:red">Please don't use the 3 in 1 Lathe unless you have been trained. </div>''' | |||
London Hackspace has a [http://www.chestermachinetools.com/centurion-3-in-1-machine-3976-p.asp Chester Centurion 3-in-1 500mm lathe/mill/drill]. This is a useful tool for tasks which are too large for our mini mill & lathe. | London Hackspace has a [http://www.chestermachinetools.com/centurion-3-in-1-machine-3976-p.asp Chester Centurion 3-in-1 500mm lathe/mill/drill]. This is a useful tool for tasks which are too large for our mini mill & lathe. | ||
==Safety Information== | |||
It's worth reading around the subject before you try to start on the actual machine - it's easy to teach some simple basic operation, but much harder to teach all the things you SHOULDN'T do. You've got to get a real sense of your limitations, and always research any new operation to make sure you're doing it safely. There are pointers to educational materials in the [[Library#Machining|Library]] | It's worth reading around the subject before you try to start on the actual machine - it's easy to teach some simple basic operation, but much harder to teach all the things you SHOULDN'T do. You've got to get a real sense of your limitations, and always research any new operation to make sure you're doing it safely. There are pointers to educational materials in the [[Library#Machining|Library]] | ||
==Tools== | |||
There is a 4-jaw and 3-jaw chuck for the lathe, and a huge vice for the mill. | There is a 4-jaw and 3-jaw chuck for the lathe, and a huge vice for the mill. | ||
| Line 29: | Line 33: | ||
If you would like to help there is an [[Pledges/Lathe_Milling_Machine_Combo_Tools | active pledge]] to buy more tools for this machine. | If you would like to help there is an [[Pledges/Lathe_Milling_Machine_Combo_Tools | active pledge]] to buy more tools for this machine. | ||
==Training== | |||
[[Lathe_Training|Lathe Training Page]] | |||
This is a dangerous machine, and is perfectly capable of causing serious injury. For this reason, you must be trained to use it. It's fitted with a key-switch emergency stop so that only keyholders can switch it on. | This is a dangerous machine, and is perfectly capable of causing serious injury. For this reason, you must be trained to use it. It's fitted with a key-switch emergency stop so that only keyholders can switch it on. | ||
MIT have 3 videos about working with a lathe. You will still need in-person training, but they are full of good tips and will help everything go smoothly. | MIT have 3 videos about working with a lathe. You will still need in-person training, but they are full of good tips and will help everything go smoothly. | ||
| Line 55: | Line 56: | ||
==Maintenance== | ==Maintenance== | ||
The [[Equipment/LatheMillCombo/Logbook|Logbook]] is used to record any changes, problems or concerns about the machine. | |||
[[File:Centurion_oiling.png|thumb|500px|right|Oiling schedule from manual]] | [[File:Centurion_oiling.png|thumb|500px|right|Oiling schedule from manual]] | ||
Oiling is critical to keeping the 3-in-1 in a good condition. The machine must be oiled before and after every use. The slideways should be oiled with slideway oil, and all other parts should be oiled with general-purpose machine oil. | Oiling is critical to keeping the 3-in-1 in a good condition. The machine must be oiled before and after every use. The slideways should be oiled with slideway oil, and all other parts should be oiled with general-purpose machine oil. | ||
| Line 75: | Line 79: | ||
http://wiki.london.hackspace.org.uk/view/Pledges/Lathe_Milling_Machine_Combo | http://wiki.london.hackspace.org.uk/view/Pledges/Lathe_Milling_Machine_Combo | ||
==Mailing List== | |||
3 in 1 lathe [https://groups.google.com/forum/?hl=en&fromgroups#!forum/3-in-1-lathe- Mailing List ] | |||
[[Category:Tools for use on metal]] | [[Category:Tools for use on metal]] | ||
Revision as of 12:50, 27 May 2014
| 3-in-1 Lathe | |
|---|---|
 | |
| Model | Chester Centurion 3-in-1 500mm |
| Sub-category | Metalworking |
| Status | Good working order |
| Consumables | Unknown |
| Accessories | Unknown |
| Training requirement | Yes |
| Training link | See training section |
| ACnode | Yes |
| Owner | LHS |
| Origin | Pledged March 2011 |
| Location | Basement, Workshop |
| Maintainers | Steve, Ian, Dean(deanforbes), Russ |
 | This article may require cleanup. The specific problem is: Cleanup per Wiki todo. (April 2013) |
London Hackspace has a Chester Centurion 3-in-1 500mm lathe/mill/drill. This is a useful tool for tasks which are too large for our mini mill & lathe.
Safety Information
It's worth reading around the subject before you try to start on the actual machine - it's easy to teach some simple basic operation, but much harder to teach all the things you SHOULDN'T do. You've got to get a real sense of your limitations, and always research any new operation to make sure you're doing it safely. There are pointers to educational materials in the Library
Tools
There is a 4-jaw and 3-jaw chuck for the lathe, and a huge vice for the mill.
If you would like to help there is an active pledge to buy more tools for this machine.
Training
This is a dangerous machine, and is perfectly capable of causing serious injury. For this reason, you must be trained to use it. It's fitted with a key-switch emergency stop so that only keyholders can switch it on.
MIT have 3 videos about working with a lathe. You will still need in-person training, but they are full of good tips and will help everything go smoothly.
- Lathe 1: Lathe basics; turning and facing; cutting off a part
- Lathe 2: Tapping; boring; knurling; cutting tapers; turning shafts with a live centre; single point thread turning
- Lathe 3: Chucking large items; using lathe arbours; turning between centres; working with irregular shapes & thin materials.
More information on Lathe Training. Add tips to the Poster.
Projects
Please list here your projects
- Metal Syringe Dean
Maintenance
The Logbook is used to record any changes, problems or concerns about the machine.
Oiling is critical to keeping the 3-in-1 in a good condition. The machine must be oiled before and after every use. The slideways should be oiled with slideway oil, and all other parts should be oiled with general-purpose machine oil.
The current maintainers on the 3-in-1 are:
- Ian H,
- Adrian
- Russ
- Liam Lynch
Please speak to one of these people if you encounter any problems with the lathe. Maintainers are NOT cleaners however so don't expect them to clean up for you! If you can't find them immediately, make sure you email the list.
Interesting Links
Add your links here with a small description.
File:Centurion Instruction Manual.pdf
http://wiki.london.hackspace.org.uk/view/Lathe_Training
http://wiki.london.hackspace.org.uk/view/Pledges/Lathe_Milling_Machine_Combo
Mailing List
3 in 1 lathe Mailing List
