Gantry CNC: Difference between revisions
No edit summary |
No edit summary |
||
| Line 37: | Line 37: | ||
* The spindle is currently fitted with an ER20 collet chuck and can take cutters up to 13mm diameter. Collets can be found on top of the Boxford CNC. | * The spindle is currently fitted with an ER20 collet chuck and can take cutters up to 13mm diameter. Collets can be found on top of the Boxford CNC. | ||
* To start the spindle, press the green button on the VFD. Use the up and down keys to vary the speed. | * To start the spindle, press the green button on the VFD. Use the up and down keys to vary the speed. | ||
== Gnerating g-code from your designs == | |||
There are a lot of different options for preparing a g-code file which can be loaded onto the CNC to cut a design. Some examples of free software include; | |||
2D Packages | |||
* MakerCam (Free) http://www.makercam.com/makercam.swf | |||
* Cambam (LHS has a license, installed on the Robotics laptop) http://www.cambam.info/ | |||
3D Packages | |||
* Autodesk Fusion 360 (Free for non-commercial use, Windows / OSX) http://www.autodesk.co.uk/products/fusion-360/overview | |||
When using Fusion 360, in order to post to the Hackspace CNC machines, the Generic EMC2 post-processor should be selected when finally saving the g-code file. LinuxCNC recognises the "ngc" file extension although any extension can be used. | |||
Revision as of 16:16, 18 October 2015
| Gantry CNC | |
|---|---|
 | |
| Model | LHS Design |
| Sub-category | CNC |
| Status | Under construction |
| Consumables | Router / Milling Cutters, material to cut |
| Accessories | NA |
| Training requirement | Yes |
| ACnode | Yes |
| Owner | LHS (spindle and VFD currently on loan) (Frame Dean) |
| Origin | LHS Built |
| Location | Basement, |
| Maintainers | CNC Team, Robotics, Metalbashers, |
Summary
This system can cut 2d and 3d shapes from materials such as wood, plastic, metal and composites. Useful for cutting things that can't be cut in the laser cutter. We made this CNC from the UCL donated linear slides and stages, and other things lying around the space, and some bits and pieces that members had. Any suggestions for improvements / modification are welcome.
Specs
- Spindle 1750 to 17500rpm
- Rapid traverse rate at 100% 2000mm/min
- Axis travel
- X(cross) 850mm
- Y(longitudinal) 960mm
- Z(vertical) 80mm (Phase 1), 200mm (Phase 2)
Technical
The system currently runs LinuxCNC on the PC built into the base.
Using the system
- The spindle is currently fitted with an ER20 collet chuck and can take cutters up to 13mm diameter. Collets can be found on top of the Boxford CNC.
- To start the spindle, press the green button on the VFD. Use the up and down keys to vary the speed.
Gnerating g-code from your designs
There are a lot of different options for preparing a g-code file which can be loaded onto the CNC to cut a design. Some examples of free software include;
2D Packages
- MakerCam (Free) http://www.makercam.com/makercam.swf
- Cambam (LHS has a license, installed on the Robotics laptop) http://www.cambam.info/
3D Packages
- Autodesk Fusion 360 (Free for non-commercial use, Windows / OSX) http://www.autodesk.co.uk/products/fusion-360/overview
When using Fusion 360, in order to post to the Hackspace CNC machines, the Generic EMC2 post-processor should be selected when finally saving the g-code file. LinuxCNC recognises the "ngc" file extension although any extension can be used.
