447 Networking POE: Difference between revisions
From London Hackspace Wiki
m (Kraptv moved page Networking/POE to 447 Networking POE: 447 Networking POE used midspans - this config is old and wiki should reflect this.) |
m (Made notes about PoE history and midspan comments.) |
||
| Line 1: | Line 1: | ||
== Power Over Ethernet == | == Power Over Ethernet == | ||
This page | This page documented the use of POE kit at 447 Hackney Road. We have deployed considerably more POE equipment into Ujima House (our 2018 Wembley location) and updated another wiki page accordingly. At 447, we had a creative balance of POE switching and midspans. (Wembley is mostly POE-enabled network switches) | ||
=== Producers === | === Producers === | ||
Latest revision as of 15:32, 30 December 2018
Power Over Ethernet
This page documented the use of POE kit at 447 Hackney Road. We have deployed considerably more POE equipment into Ujima House (our 2018 Wembley location) and updated another wiki page accordingly. At 447, we had a creative balance of POE switching and midspans. (Wembley is mostly POE-enabled network switches)
Producers
| Name/type | Gigabit? | Ports | Location | Comments |
|---|---|---|---|---|
| PowerDsine 6012 | No | 12 | downstairs kit pile | Has a serial port, don't know how to manage it |
| Phihong POE370U | Yes! | 16 | Quiet room rack | code to manage it here: https://github.com/londonhackspace/phihong , It's connected to booch and can be managed from there. |
| Cisco 3560 | No | 24 | Basement Rack, hostname cisco-poe | |
| Dlink P1012 | No | 12 | downstairs kit pile | Manageable with Ethernet, not setup. |
Phi Hong (Quietroom midspan) ports
For the inputs: a plain number is Equipment/Cisco2, and 3com is the Equipment/3com1. For the outputs a plain number is on the top 2 patch panels (which are numberd 1 to 48), and 3-something is on the bottom patch panel, otherwise it's directly connected without going through a patch panel.
x = not used.
| Input Switch port | Midspan Port | Output Patch Panel port | Notes |
|---|---|---|---|
| 3 | 1 | ap1 | (Quietroom AP) - direct |
| 4 | 2 | 42 | -> classroom ceiling -> ap2 |
| 3com-3 | 3 | Booch | direct |
| x | 4 | x | |
| x | 5 | x | |
| 3com-13 | 6 | 37 | -> backdoorbot |
| x | 7 | x | |
| 3com-41 | 8 | 41 | -> classroom ceiling -> classroomcam |
| 3com-9 | 9 | 3-9 | ?mainroomcam? |
| x | 10 | x | |
| x | 11 | x | |
| 22 | 12 | 48 | electronics area, why is this poe? (I probably have the wrong port) |
| 44 | 13 | 13 | pillar near shower -> phone on black desks |
| 3com-37 | 14 | 3-12 | by tesla -> tesla phone |
| x | 15 | x | |
| 32 (?) | 16 | 44 | cleaning cupboard, one day we hope to have the PIR's wired up... |
Consumers
currently running
- ap1 and ap2, both upstairs, powered by the Phihong POE370U
- Mainroomcam
- classroomcam
- (backdorbot)
- booch
- many ip phones around the space for Project:VOIP
not yet installed
- Arduino + DMX shield
- acnodes x ?
